Has any body heard of or actually put a viper motor in there Ram? Its a thaught and I was wondering what was involved? I.E. tranny,wireing ect.

 

thats what the ram srt 10 is

 

Yes I know, But the question is after the fact that there is a stock 360 in it. I was told that the block is based off the same idea and the motor mountes would actually match. I am just wondering what other modifications would have to be made?

 

Thats the old V-10 and the V-10 you are talking about is the 8.0L "MAGNUM" V-10 that was available in the Heavy Duty pickups. The 8.0L "VIPER" V-10 was based off the truck V-10 design, but thanks to Lamborgini and an aluminum black and heads, the motors are completely different. </P>


redriderbob</P>

 

http://forums.pickuptruck.com/showfl...=&amp;Number=2 38319&amp;page=6&amp;view=collapsed&amp;sb=5&amp;o =&amp;fpar t=1</P>


read this...</P>


redriderbob</P>

 

redriderbob, i gotta say, you are absolutely FULL of information huh?
every thread i read you got a back story on something, you've been
doing some homework haven't you?

 

If you're still wondering about the new SRT-10, the only modifications to the engine to be put in the Ram was a new oil pan and longer shifter linkage.</P>

 

so buy the motor mounts, the engine, the tranny, and the SRT-10 pcm, also a drive shaft, and a rear end to handle all that hp and torq, how much do you suppose that'd cost though? oh and don't forget there was over a 100 mods done for that truck. just buy one! or get a KenneBell S/C for a Hemi<IMG src=smileys/smiley4.gif border="0">.<edited><editID>HEMI TT</editID><editDate>38012.0293287037</editDate></edited>