Anyone know how to disable this feature?
Thanks
RT

 

Fuse panel under the driver seat has a number of fuses that need to be pulled. You can do this without disabling the headlamps from working at night. The bulbs aren't cheap to replace so I recommend it if you do a lot of daytime driving.

 

Thank you...
It worked. I removed 2 fuses and now the headlamp switch operates normally. The high/low beam worked fine too.

RT

 

Which fuses (number/position) did you remove? I need to enable my DRL on my 06 for work purposes and it did not come with DRL option. It's only a $50 option I cant imagine there being much to it.

Thanks

Joe

 

Anyone know how to disable the DRL's on teh 2007 Sprinter?

 

I looked in the fuse box where two DRL fuses would go...nothing in there yet the headlights still come on when I start it up. Help!

 

I've heard the only way to do it is with the Star scan tool that the dodge dealer uses. Let me know if you find out any different.

 

the only way to disable on an '07 is with a scan tool, sorry.

 

New here, I have a 2002 dodge caravan sport and my running lights do not work, all other lights function properly, fuses are good as well as relay switches. I was told to replace my body control module, does this seem right

 

Hi Kate, welcome to the forum. This is actually the sprinter section, there is a section for caravan's but we don't punish you until your second mishap

The daytime running lamps are turned on by changing the country code in the body controller from USA to Canada. Daytime running lamps are required in Canada so the BCM turns them on in that code. It is very possible that all you need to do is have the country code changed.