Hey everyone...I joined this board to get some help for my friend's 1992 Stealth. It's a 3.0, 2 wheel drive and has been sitting for almost 2 years(poor thing). The first problem is the clutch pedal. It has no pressure and goes straight to the floor and stays there. It doesn't move the slave cylinder piston at all. I replaced the slave cylinder after doing some searching on there to find out where it was. It wasn't too bad. But that hasn't solved the problem. I don't get any fluid in the bleeder and it seems to just sit in the reservoir. Also there is an orange colored sludge that was in the slave cylinder and on the sides of the reservoir. I am guessing the problem is the clutch master cylinder. I just wanted to get the opinions of some people before I pull the master cylinder, clean it, and rebuild it.

Any info would help... including an easy way to get to the top bolt under the dash for the master cylinder. I can’t seem to get a socket on it...even with a swivel.

Also he will be looking to sell the car soon. I am not sure how much he will be asking but it is in the Akron, Ohio area and will be running and drivable before the sale. I am doing all the work to it and my motto is "do it right or do it twice". The interior is PERFECT... No joke the headliner doesn't even have a mark. Low miles too...I think around 80k but I could be wrong. So if anyone in the area is interested please let me know.


Thanks in advance

-Allyn