Hey, I have a 02 Dodge Stratus SE Coupe, and i'm looking to put LED strips inside the car so that when the doors open/close the LED lights turn on/off using the door switch. I originally thought it would be simple enough to just tap into the wires going into the door switch and bring them to the LEDs but while doing some research I learned that some door switch setups are negatively powered and some are positively powered. Aside from not knowing the difference, I don't know how mine is wired so that's why I'm here. If anybody has an answer please let me know, and maybe some info on how to tackle the project either it's positively or negatively wired. Thank for reading/replying!