I had tinting done at my local tinting place and they tinted the rear window only 90% and left a area with the little black dots. I would like to know what those black dots are and if they could remove them and make the tinting actually look good not like a half done job. A quick respone would be Very appreciated!

 

I scraped mine off and tinted over the area ... Most shops won't take the time to do it ...

 

the guy who tinted my windows said they were porcelain and they were made into the window so they couldnt take them off. Is it like a decal? If not did it come off clean?

Thanks!

 

mine were scraped off with a heavy duty razor scraper then cleaned the window with 3m adhesive remover

 

I have never tinted over those dots. The guy who trained me on it said there was a few diffrent options...one was to leave it alone. another was to scrape them off which i didnt like that idea. another was to sand that spot down with fine sand paper which would be 2000 grit or better and paint it black. He also said you could actually sand them off. but i dunno what the tint would look like over it.

 

where can i find some 3m adhesive remover?

 

Any autoparts store should have it, I know for a fact that Carquest carries it.

 

If possible get the white/red bottle of adhesive remover (pro grade) wally land sells the black/gold can (consumer grade) not near as good

 

i never heard of any of those stores i live in NY i only have autozone autobarn and pepboys which i looked and they dont have any 3m adhesive remover

 

You can look for a paint shop and they should have it also, I know down here we have a Finish Masters that sell Dupont so i would suggest that.