General Tech Good at troubleshooting? Have a non specific issue? Discuss general tech topics here.

Truck wouldn't start, started, then wouldn't start

Thread Tools
 
Search this Thread
 
Old Dec 17, 2007 | 11:24 PM
  #1  
Firemedic3387's Avatar
Firemedic3387
Thread Starter
Joined: Dec 2007
Posts: 1
Likes: 0
Default Truck wouldn't start, started, then wouldn't start

HELP! We are in the process of buying a 03 Dodge 2500 SLT HO Turbo Diesel. When we first went to look at it, it started up a purred like a lion. 1 and 1/2 weeks later (after sitting in cold weather) we went to go pick it up. We tried to start it up and NOTHING[:@]No turning over, no clicking, NOTHING! After about 7 minutes of trying we finally got her started. We let her run for about 10 minutes, shut her off and tried to start her again NOTHING!! We had to back out of the deal until the issue was fixed. It does have a keyless entry/anti-theft ignition. Could this have something to do with it? Any one have any ideas...PLEASE HELP!!
 
Reply
Old Jan 15, 2008 | 10:49 AM
  #2  
clops79's Avatar
clops79
Joined: Jan 2008
Posts: 33
Likes: 0
From:
Default RE: Truck wouldn't start, started, then wouldn't start

bad relay, selinoid, corroded wires or it could be something sticking in sec. do the lights int. and headlights com on and dim while trying to start?
 
Reply




All times are GMT -4. The time now is 06:51 PM.