jjr3211's Avatar
jjr3211
Thread Starter

Dodge Ram / 3rd Gen Ram Tech    Today 07:56 AM

HeyYou
May be a problem with the pedal position sensor as well..... (electronic throttle) Got a scanner? Plug in and see if the PPS is telling the right things.
okay update for the day replace the throttle body and it did start up and run for about a whole 10 minutes or so and then it went back into limp mode struggled to get it back home. Besides the...

0 Reply

Dodge Vans & CUVs / Dodge Ram Van    Today 04:27 AM

ElkCon
Hi all... After doing the wheel bearing, I see that my wheels are actally fake plastic chrome on steel - I never knew that - and probably didnt care LOL BUT now that I know, what 15in aluminum...
Check your bolt pattern first as Dodge/Chrysler minivans are typically 5x127mm. Hit the junkyard and look for mid to upper trim Dodge Grand Caravans or Chrysler Town & Country vans from the mid-2000s...

0 Reply
blacknot69's Avatar
blacknot69
Thread Starter

Dodge Dakota / 1st Gen Dakota Tech    Yesterday 11:19 PM

Hello everyone, I've spent a long time reading on this forum, but never posted before. I've found a lot of helpful useful information. I however seem to have a situation that seems to be unique that...

0 Reply
jpilk99's Avatar
jpilk99
Thread Starter

Dodge Ram / 2nd Gen Ram Tech    Yesterday 08:50 PM

Thanks ALL. Very helpful. My mechanic for a good donor for $500. Hoping the swap is a $1,000 or so, but ...just getting me truck back will be huge. Then I can start making money again.

0 Reply
Jval476's Avatar
Jval476
Thread Starter

Dodge Dakota / 1st Gen Dakota Tech    Yesterday 07:33 PM

Need a driver side door latch. If anyone has a parts truck or a spare one they're willing to part with please let me know. Ive tried all the lubricant and shimmying I can and the catch will not...

0 Reply

Dodge Dakota / 3rd Gen Dakota    Yesterday 07:10 PM

These are glass channels. These have been end of life for a while. I've been looking for some on my 2011. They aren't damaged but do have a little deformation and not as quiet any longer. Best option...

0 Reply
spiritguy's Avatar
spiritguy
Thread Starter

A Blast From the Past / K-Cars    Yesterday 06:34 PM

Still fixing this. I got under the seat and found the actuators for the floor and panel near the steering column. I am able to manipulate one actuator and get some air to go through the panel vents...

0 Reply
TrustyRusty93's Avatar
TrustyRusty93
Thread Starter

Dodge Dakota / 1st Gen Dakota Tech    Yesterday 05:36 PM

Figured out the issue! Was going thru the fuse box harness looking for fusible links as a possible cause, I found a 3-wire to 1-wire splice on the power side (red/white wire) that was corroded and...

0 Reply

Dodge Dakota / 1st Gen Dakota Tech    Yesterday 05:13 PM

The joy's of having a carb'd dakota. Dealer wants 400 for a new one. Nobody local has one, can't even find one only for under 250. Only thing appears to be universal which isn't tempting at all. Not...

0 Reply
spiritguy's Avatar
spiritguy
Thread Starter

A Blast From the Past / K-Cars    Yesterday 04:22 PM

Update: still fixing this. I got under and found the actuators for the floor and panel near the steering column. I am able to manipulate one actuator and get some air to go through the panel vents...

0 Reply

All times are GMT -4. The time now is 08:58 AM.