Vantrue
Thread Starter
Dodge Classifieds / Vendor Group And Special Buys Yesterday 09:39 PM
YOUR TEAM WINS. YOU SAVE.
Support your favorite national team and receive an exclusive $30 OFF Bundle Discount if your team wins.
For more details, please visit our official website【FAN VICTORY...
Dodge Dakota / 1st Gen Dakota Tech Yesterday 07:33 PM
racer27
Looking to purchase a spare tire hoist.
Does anyone have a spare laying around, or info on a possible replacement option?
alt-fuel
Thread Starter
Dodge Dakota / 2nd Gen Dakota Tech Yesterday 02:10 PM
Yes, I did the wrong thing open the parts cannon. Did not solve the problem. One part I didn't replace. In the distributor under the rotor 3 wire plug pickup assembly. No more misfire and little...
Dodge Ram / 1st Gen Ram Tech Yesterday 01:11 PM
Its normal for the tire/wheel to stick out a slightly different amount depending on the suspension height; which is proving different side vs side.
Something could be bent... control arms or...
1825817
Thread Starter
Dodge Dakota / 3rd Gen Dakota Yesterday 12:53 PM
might try to boil the part of it that is deformed, really does create alot of wind noise, junkyard? gonna try that too
Dodge01hgm
Thread Starter
Dodge Vans & CUVs / Dodge Ram Van Yesterday 12:23 PM
Hello, I have a 2001 B1500 with 127 inch wheel base with a 32 gallon fuel tank. I an wanting to drop the tank but see that there is a plastic fuel block that is in line the fuel filler hose to the...
Jimythefan
Thread Starter
2nd Gen Ram Tech / 2nd Gen RAM general discussion/NON-tech Yesterday 10:49 AM
If it helps anyone. I picked up one of those replacement Chineseium direct fit radios for my Ram with the infinity system. There's a bunch of them on ebay and amazon. I picked one up from ebay and it...
jjr3211
Thread Starter
Dodge Ram / 3rd Gen Ram Tech Yesterday 07:56 AM
HeyYou
May be a problem with the pedal position sensor as well..... (electronic throttle) Got a scanner? Plug in and see if the PPS is telling the right things.
Dodge Vans & CUVs / Dodge Ram Van Yesterday 04:27 AM
ElkCon
Hi all...
After doing the wheel bearing, I see that my wheels are actally fake plastic chrome on steel - I never knew that - and probably didnt care LOL
BUT now that I know, what 15in aluminum...