K-Cars The generation of cars that will forever live in infamy. The glorious K-car.

New Guy -motorlarry

Thread Tools
 
Search this Thread
 
Old Jul 16, 2008 | 10:09 PM
  #1  
larrydc27's Avatar
larrydc27
Thread Starter
Joined: Jul 2008
Posts: 2
Likes: 0
Default New Guy -motorlarry

I am new to the Forum and have been reading (researching) about my problem with my car for about a week now. Have found alot of good info in the Forum that has helped greatly thus far.

I was having trouble starting my 1987 Dodge Aries 2.5 auto a/c. The code was 22 for the temp sensor so I replaced it ($9.99) and the car seems to be starting fine now. I still get the code and have tried to clear it by disconnecting battery, but am still getting 22. Am not sure if there is still a problem or I just can not clear the code.I checked plug and wiring until they disappear into the harness and had connectivity.

Is there another way to check to see if the temp sensor is working? Or do I just need to stop by Autozone and have them clear the code?

Many thanks for any additional input.

motorlarry
 
Reply
Old Jul 16, 2008 | 11:10 PM
  #2  
dustyloins's Avatar
dustyloins
R.I.P. Dusty (Retired Moderator
Hall of Fame Member
Joined: Dec 2003
Posts: 24,471
Likes: 0
From: Alamosa, Colorado (200 yards from the Rio Grande)
Default RE: New Guy -motorlarry

Welcome to Dodge Forum!! I'm moving you to the K Car Section where you will get more help.....

Dusty
 
Reply




All times are GMT -4. The time now is 02:12 PM.