Magnum SRT-8 That thing got a Hemi? Indeed, a 6.1L Hemi that is. The Dodge Magnum SRT-8 is the most extreme factory wagon.

06 magnum dashlights

Old May 20, 2010 | 03:35 AM
  #1  
john hink's Avatar
john hink
Thread Starter
|
Registered User
Joined: May 2010
Posts: 3
Likes: 0
Talking 06 magnum dashlights

my 06 magnum dashlihgts wentout and i am currently using a flashlight.i have checked the cluster and went as far as trying a used cluster too see if that was the problem.unplugged all wiringharnesses under hood and checked pins,plugs for corrosion.no problem there.dimmer switch is fine as everything but the lumination works.has anyone had this problem or know a solution?HELP PLEASE AS FLASHLIGHT BATTERIES ARE GETTING EXPENSIVE LOL
 
Reply
Old May 26, 2010 | 02:04 PM
  #2  
Ramdit's Avatar
Ramdit
Amateur
Joined: Oct 2006
Posts: 35
Likes: 0
Default

Have you checked the fuses in the PDC next to the battery in the back?
 
Reply
Old May 27, 2010 | 12:53 AM
  #3  
john hink's Avatar
john hink
Thread Starter
|
Registered User
Joined: May 2010
Posts: 3
Likes: 0
Default

no but was told there is no fuse for just the dashlights.is it possible its a relay that is malfunctioning?
 
Reply
Old May 27, 2010 | 12:32 PM
  #4  
Ramdit's Avatar
Ramdit
Amateur
Joined: Oct 2006
Posts: 35
Likes: 0
Default

Is just the cluster out or is it the whole dash (heater controlls, power switch buttons etc) out also?
 
Reply
Old May 27, 2010 | 07:37 PM
  #5  
john hink's Avatar
john hink
Thread Starter
|
Registered User
Joined: May 2010
Posts: 3
Likes: 0
Default

yes just the clusterlights.everything works just no dashlights.i even tried a used cluster to make sure my cluster wasnt the problem.
 
Reply
Old Jun 2, 2010 | 01:24 PM
  #6  
Ramdit's Avatar
Ramdit
Amateur
Joined: Oct 2006
Posts: 35
Likes: 0
Default

From what I've found out, there are two ways the instrument panel lights work. They either use the steering controll module or the cluster to supply power for the lights. At the cluster in connector 3(white) on pin 11 (or/gy wire) there should be power when the lights are turned on. I am assuming since you already tried another cluster and the lights worked the same way they do now, that the steering module has the driver for the lights. That same color wire should go to all the components that light when the head lamp switch is turned on. You should check for voltage there, and could try jumping that circuit if there isn't any.
 
Reply
Old Sep 15, 2018 | 05:45 PM
  #7  
Distractor_Beam's Avatar
Distractor_Beam
Registered User
Joined: Sep 2018
Posts: 4
Likes: 0
Default electroluminescent backlight repair

There's a video on youtube:
Repairing an Instrument Cluster Backlight with the ELD-M on a 2005 Dodge Magnum
This also works on the Charger, Sebring, 300C, and Challenger.

 
Reply


Thread Tools
Search this Thread

All times are GMT -4. The time now is 07:38 AM.