What kind of bull bar is that

 

That looks sick! I had an 05 durango and bought the tires and lift and then was told I could not lift it because it was AWD. I was pissed and went and traded it in on am 05 ram 1500 lifted.

 

It is possible to lift 2006 AWD Durango for 33" tire ?

 

@RANGO226, great looking ride!!! Am planning to go down this route myself. What was the wheel/tire combo before you upgraded the rims and what spacers did you use and what is it now after you got the new rims. Also, I really like the tubular look of the bull bar, where did you get that from?

Thanks in advance for your help.

 

I had stock alloy wheels with 1.5 inch spacers. I wouldn't recommend spacers unless they are hub centric. I've been using 33" wrangler MTR. The bull bar is called a super bull bar. Can't recall where I bought it. Right now the rims I have are similar specs but are wider, there 17x10 red dirt road.

 

I have a 2007 Dodge Durango as well. I'm trying to find a lift or leveling kit to lift up about 3in. I've found lots of Ram and Dakota kits, but not much out there for Durangos newer than 02. Let me know where and what you did to get this awesome look.

 

Thank you RANGO226.

I thought the standard wheel size on the D's sold here were 18 inches but I will have to double check that. Am I correct in assuming you are using the same tire on both rims, i.e. Goodyear Wrangler MTR LT285/70R17 or 33x11.5R17LT.

From a cost effectiveness point of view, spacers will probably be the first step for me as well - any hub-centric spacers you can recommend?

Am excited to get started on my project.

 

Normally don't like that gen Durango but the way you got it set up is pretty good!

 

Hey there how can I get the same bumper you have. I have a 2009 dodge durango.

 

All you can do with the Durango is crank the torsion bar. Possibly get some aftermarket keys as well to get a little more lift. Pro comp makes a set.