i have been having to replace the cps and crank sensor every year when it gets cold. this year i replaced both and now I have all cylinders miss firing. All but cylinder 5. It also shows that that i have several codes for the coils. i did just replace all of them last summer. Any ideas? i have a 2002 dodge ram slt with a 4.7L . Would it be the tps?
HeyYou, just wanted to say thank you for the valuable feedback you contribute to this kick ass forum.
That wire harness post I made. The one you moved to D.I.Y., will not allow me to edit the imy other method to post pics.oh well
m attachments to post pics, i dont know how aages. It figures now that I figured out how to get them to show & not be sideeays.
You stated you don't use attachments to post pics? How do you do it?
Thanks again man! Its members like you that make it great!
Hey. I'm new here. But I'm hoping y'all can help. I have a 2007 ram 2500 5.7 6 spd manual and my o2 sensor wiring got messed up. I was just wondering if o2 sensors connect to the coil/injectors wiring harness Or any idea how much a shop would charge to replace it.
On my 2002 Ram 1500 4.7 l. I posted about the P1388 code. I found I was not getting any power to the ASD really at all. I wired it in thru a fuse and the truck starts and runs now. The problem now is when the gages drop the truck dies. It will only do it at an idle BUT it won't start again till the gages come back. Any ideas on how to help. My 2004 3500 diesel is down , the rear end busted. I have to replace the whole thing so until I figure this out I'm without a vehicle. I need help urgently......
NEED HELP FAST!! Have a 2001 Dodge Cummins 5 speed manual and I have had all my fuel pressures checked and they all check out. My truck is still runnin like ****. It is really bogged down but the turbo will spool at like 1700 rpm and gain power after that but no power at lower rpms any suggestions on what to do
Got thinking about it, my truck weights just over 6.3k with me in it. My cat is rattleing like hell most rpms especially at idle, my CAD is locked in so driveshaft is always spinning and i live in the hills. What should my mpg be?