Our new shop and the services that we offer.
Thread Starter
|
Rookie
Joined: Apr 2006
Posts: 82
Likes: 0
From:
Our new shop and the services that we offer.
Hey guys just thought I would take a little time and give you an idea of what we do here at Stripper Motorsports and what we have to offer in services for your car, truck or SUV.
As of 4/17/06, we have moved into our new shop. The new shop is just a little bit bigger than our old shop, but it is setup a lot better for us. The shop is 1600sq/ft, we went through and totally repainted it and fixed her up to be ready to service our customers in a nice clean, friendly shop environment.
Here are a few photos of the shop for you guys to look at. These were taken on move-in day.
Now, here’s what we can do for you in terms of services. If you need something done that’s not on the list below, give us a call and we will see what we can do for you!
We offer the following services through our shop:
• Complete retail parts sales from the leading manufacturers in the industry. (Cold Fusion Nitrous, Turbonetics, BullyDog, Edge Products, SuperChips, Borla, Magnaflow, Holley, Aeromotive, Procharger, Vortech, Paxton, Mopar Performance, ASP Pulley, Eagle Specialty Products, JE Pistons, Comp Cams, NX, NOS, Hooker, Dynatech, K&N, Airaid, Hypertech, Motive Gears, Strange, Moser, Pacesetter headers, Belltech, Eibach, Hotchkis, and many, many more!!)
• Complete installation services for any of the parts that we sell. If we sell it………….we can install it! Our Mechanics our State and ASE certified, only the best work at our shop.
• Complete Custom Nitrous plumbing and installs. Let us plumb and install your nitrous system for you. Let our years of nitrous experience pay off for you!!
• Custom Fabrication work, roll cages, roll bars, custom headers, custom turbo set ups, 4 link suspensions, mini tubs, custom mandrel bent t exhaust and just about anything else you could need fabbed up. Here are some pic's of a job we recently completed.
• Gear installations, you want a gear put in your car, truck or SUV we are your shop.
• Complete engine machine shop services. Boring, honing, crank balancing, and decking can all be handled by us. Our machine shop has over 25 years of automotive machining experience.
• Precision Engine building services. Let our 25 years of machining and precision engine building take care of your next build. We can build anything from street to strip, mild to wild. (Look for our crate engines coming out very soon!)
• We also offer basic services, such as brake jobs, tune ups, and fluid changes.
Coming out in the next month we will be releasing some of our own products. The first couple of products we will be releasing will be CNC ported throttle bodies for the late model Dodges and Chevrolets, Also Ported & Prepped oil pumps for the 5.7L & 6.1L HEMI’s and LSx series engine from GM. After those items will come our complete line of Street/Strip crate engines for the late model Dodges, including stroker versions for the HEMI.
Stay tuned to our web site for further updates as we move forward!! Also don’t forget to keep an eye on our “SHOP PROJECTS” page on our site; you will be able to see our R&D as we do it and some of the cool cars and trucks we get to work on!
Please feel free to contact us if you have any questions, we are always looking to help!!
Thanks,
Stripper Motorsports
As of 4/17/06, we have moved into our new shop. The new shop is just a little bit bigger than our old shop, but it is setup a lot better for us. The shop is 1600sq/ft, we went through and totally repainted it and fixed her up to be ready to service our customers in a nice clean, friendly shop environment.
Here are a few photos of the shop for you guys to look at. These were taken on move-in day.
Now, here’s what we can do for you in terms of services. If you need something done that’s not on the list below, give us a call and we will see what we can do for you!
We offer the following services through our shop:
• Complete retail parts sales from the leading manufacturers in the industry. (Cold Fusion Nitrous, Turbonetics, BullyDog, Edge Products, SuperChips, Borla, Magnaflow, Holley, Aeromotive, Procharger, Vortech, Paxton, Mopar Performance, ASP Pulley, Eagle Specialty Products, JE Pistons, Comp Cams, NX, NOS, Hooker, Dynatech, K&N, Airaid, Hypertech, Motive Gears, Strange, Moser, Pacesetter headers, Belltech, Eibach, Hotchkis, and many, many more!!)
• Complete installation services for any of the parts that we sell. If we sell it………….we can install it! Our Mechanics our State and ASE certified, only the best work at our shop.
• Complete Custom Nitrous plumbing and installs. Let us plumb and install your nitrous system for you. Let our years of nitrous experience pay off for you!!
• Custom Fabrication work, roll cages, roll bars, custom headers, custom turbo set ups, 4 link suspensions, mini tubs, custom mandrel bent t exhaust and just about anything else you could need fabbed up. Here are some pic's of a job we recently completed.
• Gear installations, you want a gear put in your car, truck or SUV we are your shop.
• Complete engine machine shop services. Boring, honing, crank balancing, and decking can all be handled by us. Our machine shop has over 25 years of automotive machining experience.
• Precision Engine building services. Let our 25 years of machining and precision engine building take care of your next build. We can build anything from street to strip, mild to wild. (Look for our crate engines coming out very soon!)
• We also offer basic services, such as brake jobs, tune ups, and fluid changes.
Coming out in the next month we will be releasing some of our own products. The first couple of products we will be releasing will be CNC ported throttle bodies for the late model Dodges and Chevrolets, Also Ported & Prepped oil pumps for the 5.7L & 6.1L HEMI’s and LSx series engine from GM. After those items will come our complete line of Street/Strip crate engines for the late model Dodges, including stroker versions for the HEMI.
Stay tuned to our web site for further updates as we move forward!! Also don’t forget to keep an eye on our “SHOP PROJECTS” page on our site; you will be able to see our R&D as we do it and some of the cool cars and trucks we get to work on!
Please feel free to contact us if you have any questions, we are always looking to help!!
Thanks,
Stripper Motorsports