Yea why?? you cant

 

No you can, but making a DP is very very difficult to do, as is an IC if you don't know what your doing.

Why not just go with the Borla or Mopar exhausts for our cars, or go to a custom shop and have them fabricate one for you, thats what I did with my stratus, expensive, but worth while.

And get a bigger FMIC from a company, I wouldn't dare make one myself, I know people who know everything about these cars that wouldn't dare. Its such a big risk to take, and expensive and time consuming, why not just buy them??

 

I dont but fixing to learn By Shop Partner know how to do all that, I will let every one know if whated how it goes and ect.. we are fixing to get a web site going tand start to work on mine.

Kevin knows how to do all the mechanic stuff I know a lot but he is like a encyclopdia when it comes to that stuff. Port Polish port intake manifold.

but like I said in a diffrent post Trial and Eare (sorry I am not a speller)

 

I guess if you have the time patience and money to waste trial and error would be okay, but the error part would scare me more than anything.

 

Well you think you buy the core for a $100 metiral is about $100 and time to wield and look preety 3-4 hrs slap it in (should not say slap but take time to install 1-2 hrs) and give it a shot people charge about $600-1000 for something that cost under $350 to make

metirals for the exhaust and down pipe wont cost that much either.

He did his worked out great so now we are going to start with mine

 

the skeptical eyebrow has been raised.... [sm=smiley3.gif]

 

Well good luck with it, but like you said trial and error, if you make a 350$ error, then you have to spend another 350$ to fix it. And I've never seen an IC for the SRT-4 that costed 1k. And its more than just looking pretty.

But keep me posted, this is interesting.

 

Will do so!

Pretty in the wields!

 

pretty welds??? lol im so lost

 

ota [8D]

MUST BE PRETTY FOR ALL THOSE McDONALDS WORKERS LOL