Anyone know of a good write up?

 

i do tinted tail lights if you want...

[IMG]local://upfiles/30925/4CC7033BE2974D13B498F40463B8228A.jpg[/IMG]

[IMG]local://upfiles/30925/7B7691895BAA44119A5D30665A7D4035.jpg[/IMG]

 

a write up? it's not that hard...what do you need to know?

 

Thanks for the offer MoparMan, but Long Beach is quite a ways away, and I kinda need my tail lights.... Yours look pretty good though!

I just wanted to know specifics about the coating process. I know how to remove the assemblies (looks easier than hell). I've heard it can be tricky if your not accustomed to spraying things.

Here is what I have gathered so far:

1. Lightly sand tail light (for better adhesion)
2. Spray about 6? coats of niteshade (taking time in between to let dry/prevent runs)
3. Spray about 6? coats of clearcoat
4. wet sand & wax if you want to

I guess my question would be in how many layers of what & if the wetsand at the end really needs to be done.....

How do you do it MoparMan? Or is it a secret? lol

 

1. wet sand tails. ( for adhesive )
2. get a couple oz.'s of house ofcolor clear ( works best )
3. put a little bit of black paint in the clear ( house of color if possible )
4. spray on 2 coats at a time to avoid runs...
5. wait 10 mins to let tack up. and reapeat step four.
6. keep coating till you like the color...
7. let dry ( 24 hours )
8. wet sand yet again then buff to high gloss

 

Thanks! I'll check into that!

 

There are pics on our site of them, those are ours at the top of this page also!

Let me know, Thanks