I have an agp 50 trim kit with JMB performance CAI and catch can plus a few other goodies. I installed the turbo kit along with the cc back in may. there is a small breather on the valve cover because the intake has no stem for a hose. I have been looking at the clear tube on the side of the cc but nothing has accumulated in it. two drops came out today when I took it apart. does it matter where you put the hoses(above the TB on the manifold) one goes to pcv and the other to manifold, but which stem? when I was running the stock turbo I had to change it every oil change 3k. there is however a small amount of build up around the breather but nothing serious. is this normal with a larger turbo?

best shots I could find at this time

[IMG]local://upfiles/9563/795C9B8449B44AD7B0743C91F67CB665.jpg[/IMG]

[IMG]local://upfiles/9563/DD9EBCA7EA154D54990F3E1DC973F320.jpg[/IMG]

 

sorry i cant help you i confused myself trying lol

 

Glad I am not the only one! All I can think to say is PCV-->CC-->TB & Breather on the other side (directly off the valve cover). As far as which stem to use... I'm not sure I know what you are refferring to... There aren't really a lot of options on that one. I don't see how a larger turbo would have an impact on your cc, but I could be missing something... Did you check the sticky on the CC?