K&n air filter ?
#1
09-14-2008, 08:46 AM
Join Date: Sep 2008
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
#3
09-14-2008, 03:01 PM
Record Breaker
Join Date: Aug 2007
Location: roswell New Mexico
Posts: 1,797
Likes: 0
Received 0 Likes
on
0 Posts
i fail to understand how it takes the oil from the filter. just make sure you keep it clean and oil it correctly.
17. How much oil should I use to re-oil my filter after it is cleaned?
The best way to ensure proper oiling is to use our squeeze bottle recharger kit (Part No. 99-5050). With a squeeze bottle, you simply run a bead along the top of each pleat on both sides of the filter. If using an aerosol recharger kit (Part No. 99-5000), make one light pass over the entire filter area front and back. The oil will then be evenly absorbed throughout the rest of the cotton medium over the next several minutes. We recommend you let your filter set for 1 hour to let any excess oil run off the filter. In any event, you do not need to worry about over oiling your filter and you should make sure the oil appears fully absorbed before re-installation. If you want exact oiling requirements, enter the part number in the “Search by Part” box on our Application Search Page and the factory oil amount will be shown.
16. How do I clean a K&N air filter?
Use a K&N Filter Care Service Kit, available at all major auto parts stores and a low pressure nozzle-free garden hose. A filter cleaned with K&N cleaning products will ensure a lifetime of performance from your air filter. Instructions for cleaning your K&N air filter are on our Air Filter Cleaning Instructions page.
try emailing em
http://www.knfilters.com/contact.htm
17. How much oil should I use to re-oil my filter after it is cleaned?
The best way to ensure proper oiling is to use our squeeze bottle recharger kit (Part No. 99-5050). With a squeeze bottle, you simply run a bead along the top of each pleat on both sides of the filter. If using an aerosol recharger kit (Part No. 99-5000), make one light pass over the entire filter area front and back. The oil will then be evenly absorbed throughout the rest of the cotton medium over the next several minutes. We recommend you let your filter set for 1 hour to let any excess oil run off the filter. In any event, you do not need to worry about over oiling your filter and you should make sure the oil appears fully absorbed before re-installation. If you want exact oiling requirements, enter the part number in the “Search by Part” box on our Application Search Page and the factory oil amount will be shown.
16. How do I clean a K&N air filter?
Use a K&N Filter Care Service Kit, available at all major auto parts stores and a low pressure nozzle-free garden hose. A filter cleaned with K&N cleaning products will ensure a lifetime of performance from your air filter. Instructions for cleaning your K&N air filter are on our Air Filter Cleaning Instructions page.
try emailing em
http://www.knfilters.com/contact.htm
#4
09-14-2008, 11:53 PM
Join Date: Dec 2003
Location: Alamosa, Colorado (200 yards from the Rio Grande)
Posts: 24,472
Likes: 0
Received 0 Likes
on
0 Posts
#5
09-15-2008, 02:13 AM
Record Breaker
Join Date: Sep 2007
Location: BAMA
Posts: 1,753
Likes: 0
Received 0 Likes
on
0 Posts
#6
09-15-2008, 07:50 AM
Captain
Join Date: May 2008
Location: PA
Posts: 521
Likes: 0
Received 0 Likes
on
0 Posts
#7
09-15-2008, 11:05 AM
Official Site Sponsor
Join Date: Jul 2008
Location: Hollywood, FL
Posts: 118
Likes: 0
Received 0 Likes
on
0 Posts