Hi gang my name is woody and im in N.H.
I have a friend that brought his 1995 cirrus over to my garage.
He went to work car ran fine.
Came out to start it and it would turn over but no start.
Had it towed to the my garage and we got it inside.
Ok so we turn the key to listen for the pump relay or pump and nothing.
No click or pump run
Maybe relay? so we swap out one the other relay try it again nothing.
ok I should get relay click so i went down to under the back set and prob the hot line for the pump.
tell the worker hit the key.
I prob the line click and pump run?
I said start it and it started right up.?
Now it starts every time.
So i throw my computer on it and check out some things and every thing seems fine so i tap the computer nothing. runs fine.
I did check out how many time it had been started from the last time codes were cleard and it said 150 times.
So he says ill pick it up and drive it around town.
So he was driving it around 2 hour off and on starting and stoping when he went to pull into aparking place and it just died.
wouldnt start.
So we had it towed back and they droped it off.
I went out and it started right up
So i went and put my computer on it to see if anything looks funny and i found one thing.
Went back in to see how many times it was started 2 since the code where cleared.
I didnt clear any codes
I sounds like computer died and eraced codes to me? any one got any clues? woody

 

Welcome to the site,
FF

 

Welcome to D.Forum.