1992 dodge 350. 318
#1
03-28-2010, 05:02 PM
Join Date: Mar 2010
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
1992 dodge 350. 318
my van runs good cold ****'s good.hold it to the floor and will run thro the gear's fine. lot's of power. when warm's up won't **** if holding to floor if you let up the gas a hair will **** then.has loss of power when warm. take's for ever to get to 55mph . and if you hold it to the floor and it don't
shift it will act like it's going to to the riv chip, start's farting and bucking. have change the speed senor the tp senor and the map senor.. did a fuel presser test came up with 30 psi at idle . did the squeeze return line same presser. took it for a drive with presser gauge stell on and when i hold to floor the presser drop's to 10 psi be for shifting again have to let up on gas befor it will shift . guess i'm hopeing i don't need to do a fuel pump. thx's for reading this
shift it will act like it's going to to the riv chip, start's farting and bucking. have change the speed senor the tp senor and the map senor.. did a fuel presser test came up with 30 psi at idle . did the squeeze return line same presser. took it for a drive with presser gauge stell on and when i hold to floor the presser drop's to 10 psi be for shifting again have to let up on gas befor it will shift . guess i'm hopeing i don't need to do a fuel pump. thx's for reading this
#2
03-28-2010, 05:03 PM
Join Date: Mar 2010
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
#3
03-29-2010, 11:22 AM
#4
03-29-2010, 03:04 PM
Join Date: Mar 2010
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
#5
03-29-2010, 03:11 PM
Join Date: Mar 2010
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
#6
03-29-2010, 04:00 PM
#7
03-29-2010, 04:50 PM
Champion
Join Date: Feb 2007
Location: Palm Beach, Florida
Posts: 2,612
Likes: 0
Received 0 Likes
on
0 Posts