98 Dakota
Thread Starter
|
Registered User
Joined: Jan 2012
Posts: 5
Likes: 0
From: Swift Current, Saskatchewan, Canada
98 Dakota 5 speed problem
I just joined up and looking for some insite to my problem. I have a 98 Dakota with a 5 speen manual. I heard something break and upon further inspection I found a small hole in the tail shaft of the tranny. My question is, see the tail shaft can be unbolted can I remove just the tail shaft and repair what is broken inside or will I have to disassemble the entire transmission
Last edited by LORDPECS; Jan 21, 2012 at 08:16 PM.
All Star
Joined: Jul 2011
Posts: 818
Likes: 1
From: Red Lion, PA (USA)
Welcome Aboard LORDPECS! Stay tuned - a Technician (or member) will jump in shortly to provide a possible solution. In the meantime, don't forget to browse Sub-Forums: 2nd Gen Dakota (1997-2004) for stuff related to your ride.
Professional
Joined: Jan 2011
Posts: 201
Likes: 0
I would not be too optomistic that you can, that is kinda rare for any 5-speed extension housing to slip right off, but there is always those few...It may help if you can identify what 5-speed trans you have....
Captain
Joined: Mar 2010
Posts: 635
Likes: 0
From: Pa. now
Welcome! Hole n tailshaft? Never heard of it before. Im thinking it might be worth looking into deeper to find out what the heck is going on and what could have caused it. After all loosing a tranny out on the road is a bear and none of us want to be there.