I finally figured out how to start a thread!
I seem to have a goofy problem that involves cylinder 2 with zero spark. Vehicle started running horribly last night. Replaced plugs and wires, were needed, but not the problem. I then replaced the camshaft position sensor, some improvement, but still running rough. Check Engine is not on. I did the three bump ignition trick, no codes, it says "done". Autozone scanned it, no codes. Pull wire cyl. #2, runs the same, no spark, other 5 are fine. I have purchased a coil pack, but have read that many times this does not solve issues. I am hoping for a little help before I pull the brake fluid reservoir and replace the coil. Thanks, Bob