hey everyone out there i just had a few simple questions.

how high do i need to lift my 1987 Dodge RamCharger to be able to fit 38" Tires under neath it.
Will a 6" Skyjacker cut it ?
and what else will i need to do ...
driveshaft ? brakae cables (yes i know i do).

and one last thing , is there any place to go for intake kits (ram air, super or turbo chargers) for my baby ?

 

The 6" would prolly rub sometimes... if you went a little bigger or put a body lift on it I think you would be ok. The brake cables miiight be ok....im not sure. Driveshaft again im not sure....

 

I put a Rancho 4" suspention w/ a 3" body on 35/12.50/15s no rubbin here...

 

we own 4. you will need to go higher than 6 inches to clear 38s. a 6 with a 3 inch body would do it. also you will need to run a 411 gear at least, if not a 456 gear. for driveline mods, you should be able to get away with shims under the springs. not being a big fan of body lifts i would run a 6 inch skyjacker with 36 inch tsl radials (nice ride on road and killer performance offroad) plus with the 36s a 411 gear would give you the performance you needed on and offroad.

 

I have a 79 trail duster with 35in tires and all I had to do is a 2in lift and some fender triming and they do just fine I off road all the time


[/align]