Suspension Is your ride slammed to the ground? Did you lift it so high you need a ladder to get in? Step in and let's talk about it.

PLEASE HELP. 98 DODGE RAM 4X4 CLUNK

Thread Tools
 
Search this Thread
 
Old Nov 22, 2007 | 12:23 AM
  #1  
NVMYSLOWRIDE's Avatar
NVMYSLOWRIDE
Thread Starter
Joined: Nov 2007
Posts: 7
Likes: 0
From:
Default PLEASE HELP. 98 DODGE RAM 4X4 CLUNK

I have a 98 dodge ram 1500 4x4 i just bought. i took it to 4 different front end shops and they all told me the same thing to replace. pitman arm and drag link, so i did. i still have the same clunk. no matter if it is a small bump it feels like the front end is going to fall out of the truck. on bad roads it is so bad and loud. i can feel it in the floor boards. it has the new following. ball joints, pitman arm, drag link, monroe shocks, steering stab rancho shock, new goodyear tires and alignment. no one can figure it out. i cant spend much more on this truck. anyone have any ideas? sway bar links look newer also. i have had this truck for 3 months.It really sucks to drive. and gets worse everyday. but all shops say everything looks tight and wonderful..

please email me at a100dork3@yahoo.com as for i wont be able to check this much. nice cite. thank you for your help and time.

nick
 
Reply
Old Nov 23, 2007 | 10:58 AM
  #2  
OE812's Avatar
OE812
Rookie
Joined: Nov 2007
Posts: 60
Likes: 0
From: River Ridge, LA
Default RE: PLEASE HELP. 98 DODGE RAM 4X4 CLUNK

Check the brake calipers for noise using a rubber mallet to hit them. Also, check the wheel well splash shields as they work loose over time. Good luck with it.
 
Reply
Old Nov 26, 2007 | 09:53 AM
  #3  
NVMYSLOWRIDE's Avatar
NVMYSLOWRIDE
Thread Starter
Joined: Nov 2007
Posts: 7
Likes: 0
From:
Default RE: PLEASE HELP. 98 DODGE RAM 4X4 CLUNK

i have tried all of that. it feels like something is loose or worn out under there. myself or 4 tire places and front end places cant figure it out. you can feel it in the drivers and passanger floor boards pretty good. some one said replace the intermediate shaft? i just dont want to throw parts at it, but might have too.
 
Reply
Old Nov 26, 2007 | 02:34 PM
  #4  
OE812's Avatar
OE812
Rookie
Joined: Nov 2007
Posts: 60
Likes: 0
From: River Ridge, LA
Default RE: PLEASE HELP. 98 DODGE RAM 4X4 CLUNK

...check the frame bushings.
 
Reply
Old Nov 26, 2007 | 09:17 PM
  #5  
dhvaughan's Avatar
dhvaughan
Hall Of Fame
Joined: Jul 2006
Posts: 12,204
Likes: 10
From: Gainesville, Ga.
Default RE: PLEASE HELP. 98 DODGE RAM 4X4 CLUNK

front shocks will clunk right under your feet if bottom bolts not torqued to 100#.
 
Reply
Old Nov 27, 2007 | 10:00 AM
  #6  
NVMYSLOWRIDE's Avatar
NVMYSLOWRIDE
Thread Starter
Joined: Nov 2007
Posts: 7
Likes: 0
From:
Default RE: PLEASE HELP. 98 DODGE RAM 4X4 CLUNK

tightened all front end bolts last night. problem solved. think it was the lower shock bolts. thanks guys
 
Reply
Old Feb 6, 2008 | 03:33 PM
  #7  
speedracer13's Avatar
speedracer13
New Member
Joined: Feb 2008
Posts: 6
Likes: 0
From:
Default RE: PLEASE HELP. 98 DODGE RAM 4X4 CLUNK

try checking the track bar if your truck has one that was the problem on mine
 
Reply




All times are GMT -4. The time now is 06:01 PM.