DodgeForum.com
Share Your Pictures with Our Community. Upload Now
Shipping damage.
Shipping damage.
0 2016/08/15 20:38:56
Shipping damage.
Shipping damage.
0 2016/08/15 20:31:22
0 2016/08/15 18:16:39
0 2016/08/15 18:16:39
Since Mopar discontinued the rear servo piston spring, I went to a local trans. shop and they hooked me up w/ a new spring! And good thing too bc the replacement A727 trans. spring they had was almost a half inch too short!
Since Mopar discontinued the rear servo piston spring, I went to a local trans. shop and they hooked me up w/ a new spring! And good thing too bc the replacement A727 trans. spring they had was almost a half inch too short!
0 2016/08/15 18:16:38
New HD Shift Technoiges front servo + HD piston vs the stock chewed up. Shifts' servo upgrade it literally about 5x as thick as the OE and the piston is much more HD as well.
New HD Shift Technoiges front servo + HD piston vs the stock chewed up. Shifts' servo upgrade it literally about 5x as thick as the OE and the piston is much more HD as well.
0 2016/08/15 18:16:34
Vavle body removed and empty case
Vavle body removed and empty case
0 2016/08/15 18:16:30
Figured I'd make the B&M deep pan look a little better while at it
Figured I'd make the B&M deep pan look a little better while at it
0 2016/08/15 18:16:29
When I found the rear servo was cracked..before disassembly
When I found the rear servo was cracked..before disassembly
0 2016/08/15 18:16:27
0 2016/08/15 15:26:41
0 2016/08/15 13:41:21
0 2016/08/15 13:41:13
Advertisement
0 2016/08/15 13:41:08
0 2016/08/14 14:37:37
0 2016/08/14 14:36:54
0 2016/08/14 14:36:35
0 2016/08/14 14:36:10
The clip fits really tight when correctly installed. Depending on who makes the clip, I found the lower bends on the clip, close to the rotor hub may slightly touch the hub while driving and make a slight scraping. I had this for 3 years, but never hurt braking, only heard a low scraping noise once and a while.
The clip fits really tight when correctly installed. Depending on who makes the clip, I found the lower bends on the clip, close to the rotor hub may slightly touch the hub while driving and make a slight scraping. I had this for 3 years, but never hurt braking, only heard a low scraping noise once and a while.
0 2016/08/14 09:18:33
0 2016/08/14 05:28:58
0 2016/08/13 05:39:07
0 2016/08/12 22:32:40
0 2016/08/12 21:42:42
0 2016/08/12 21:41:04
If i go used what numbers need to match?
If i go used what numbers need to match?
0 2016/08/12 19:01:38
0 2016/08/12 17:46:29
0 2016/08/12 17:32:57
0 2016/08/12 14:54:43
0 2016/08/12 14:53:51
0 2016/08/12 12:52:39
0 2016/08/12 09:10:59
0 2016/08/12 08:17:21
Ignore the screwed up bumper lol
Ignore the screwed up bumper lol
0 2016/08/11 19:29:46
Advertisement