DodgeForum.com
Share Your Pictures with Our Community. Upload Now
0 2024/08/01 13:53:59
0 2024/08/01 07:39:15
Could this pinched wire be causing any problems? I believe it is the wires for my crankshaft position sensor… looks like the bolt holding on my dip stick is whats pinching
Could this pinched wire be causing any problems? I believe it is the wires for my crankshaft position sensor… looks like the bolt holding on my dip stick is whats pinching
0 2024/07/31 21:28:38
0 2024/07/31 21:19:27
Could this be a culprit? It looks to be pinched under the bolt that holds in my dip stick. (This is the wires that go to the crankshaft position sensor) Although when
Could this be a culprit? It looks to be pinched under the bolt that holds in my dip stick. (This is the wires that go to the crankshaft position sensor) Although when
0 2024/07/31 17:35:17
0 2024/07/31 16:21:03
Yes i do, I think it is the mode ‘data stream’ it lets me see the 02 sensors,vss,map, ect…
Yes i do, I think it is the mode ‘data stream’ it lets me see the 02 sensors,vss,map, ect…
0 2024/07/31 13:13:33
0 2024/07/31 08:22:44
0 2024/07/31 08:20:22
0 2024/07/31 08:20:10
0 2024/07/31 08:19:56
0 2024/07/31 08:19:42
Advertisement
0 2024/07/31 08:19:29
0 2024/07/31 08:19:17
0 2024/07/31 08:19:05
0 2024/07/30 20:05:52
0 2024/07/30 18:35:20
0 2024/07/30 18:28:06
Went ahead and tested rear connector and im getting 4.83v POWER. This is with the ABS module plugged in and key ON
Went ahead and tested rear connector and im getting 4.83v POWER. This is with the ABS module plugged in and key ON
0 2024/07/30 17:33:02
0 2024/07/30 14:44:17
0 2024/07/30 14:44:04
0 2024/07/30 11:44:41
0 2024/07/30 11:43:18
0 2024/07/30 09:55:15
0 2024/07/30 09:55:14
0 2024/07/30 09:55:13
0 2024/07/30 04:58:05
0 2024/07/29 20:25:42
0 2024/07/29 20:21:52
This was the only code that i got when i scanned for abs codes, code 35 for rear circuit open
This was the only code that i got when i scanned for abs codes, code 35 for rear circuit open
0 2024/07/29 16:37:58
0 2024/07/29 16:35:38
0 2024/07/29 14:55:39
Advertisement