DodgeForum.com
Share Your Pictures with Our Community. Upload Now
0 2016/01/04 10:36:22
0 2016/01/04 10:35:59
0 2016/01/04 10:35:23
0 2016/01/04 10:12:24
I had to move everything away from the wall and still the truck only cleared the garage door by about 3 inches
I had to move everything away from the wall and still the truck only cleared the garage door by about 3 inches
0 2016/01/04 09:36:00
I don't have a picture of the old one but it wasn't blown out or broken anywhere.
I don't have a picture of the old one but it wasn't blown out or broken anywhere.
0 2016/01/04 09:35:29
I did distributor cap and rotor, spark plugs and plug wires while I was in there
I did distributor cap and rotor, spark plugs and plug wires while I was in there
0 2016/01/04 09:34:54
0 2016/01/04 07:05:36
0 2016/01/04 07:05:15
Gen 1 Dakota Brake Valve
Gen 1 Dakota Brake Valve
0 2016/01/03 20:50:50
0 2016/01/03 20:35:42
0 2016/01/03 19:16:40
Advertisement
0 2016/01/03 17:31:35
0 2016/01/03 17:31:19
0 2016/01/03 17:30:58
0 2016/01/03 17:30:42
0 2016/01/03 17:30:28
0 2016/01/03 17:30:16
0 2016/01/03 17:29:58
0 2016/01/03 13:37:41
Injector change
Injector change
0 2016/01/03 13:14:50
Pyro install
Pyro install
0 2016/01/03 13:14:48
0 2016/01/03 13:14:44
0 2016/01/03 13:14:41
0 2016/01/03 13:14:38
0 2016/01/03 13:14:35
0 2016/01/03 13:14:31
0 2016/01/03 10:03:19
0 2016/01/03 09:57:06
0 2016/01/03 09:56:06
All done and buttoned back up.
All done and buttoned back up.
0 2016/01/03 09:47:47
New MSD coil was used. The factory piece had the iron core starting to delaminate. It was time to change this out. Idle was rough and now the engine runs like a dream.
New MSD coil was used. The factory piece had the iron core starting to delaminate. It was time to change this out. Idle was rough and now the engine runs like a dream.
0 2016/01/03 09:47:30
Advertisement