DodgeForum.com
Share Your Pictures with Our Community. Upload Now
IMAG0367
IMAG0367
0 2012/02/28 11:21:00
IMAG0368
IMAG0368
0 2012/02/28 11:21:00
IMAG0239
IMAG0239
0 2012/02/28 09:07:53
IMAG0238
IMAG0238
0 2012/02/28 09:07:53
dingo
dingo
0 2012/02/28 09:07:53
2 inch lift with bald 33inch Super Swamper Trxus
2 inch lift with bald 33inch Super Swamper Trxus
0 2012/02/28 08:57:16
0 2012/02/27 20:08:15
XD Series Misfit 17" wheels
XD Series Misfit 17" wheels
0 2012/02/27 20:08:15
custom black grill
custom black grill
0 2012/02/27 20:08:15
before the wet clay experience
before the wet clay experience
0 2012/02/27 14:33:45
more wet clay
more wet clay
0 2012/02/27 14:33:45
after getting stuck in thick wet clay
after getting stuck in thick wet clay
0 2012/02/27 14:33:45
Advertisement
Snow Beast defying the snow... :)
Snow Beast defying the snow... :)
0 2012/02/27 14:22:12
Before the mirrors and running board paint
Before the mirrors and running board paint
0 2012/02/27 14:17:10
From above...
From above...
0 2012/02/27 14:17:10
Note the Afghanistan plate and Live Free or Die sticker. Before the mirrors and running board paint
Note the Afghanistan plate and Live Free or Die sticker. Before the mirrors and running board paint
0 2012/02/27 14:17:10
After the mirrors and snow melted
After the mirrors and snow melted
0 2012/02/27 14:15:03
Snow beast in the snow.....
Snow beast in the snow.....
0 2012/02/27 14:15:03
285/70/17s and Chrome grill and mirrors.
285/70/17s and Chrome grill and mirrors.
0 2012/02/27 14:15:03
2012 02 27 15.27.26 the question remains to be seen how well these will bolt up without havint to readjust head pipes going to the cat.
2012 02 27 15.27.26 the question remains to be seen how well these will bolt up without havint to readjust head pipes going to the cat.
0 2012/02/27 13:30:11
2012 02 27 15.26.12 this pcesetter header developed a leak in the center of the collector area... the welds look uneven and sloppy compared to the ebay ones..
2012 02 27 15.26.12 this pcesetter header developed a leak in the center of the collector area... the welds look uneven and sloppy compared to the ebay ones..
0 2012/02/27 13:30:11
2012 02 27 15.25.33 as far as clearances on the flange they seem to be exactly the same size and shape as the pacesetters which makes me wonder if when people complain they have to grind them down to fit and clear spark plug holes if they are using the cheaper $120 headers sold on ebay...
2012 02 27 15.25.33 as far as clearances on the flange they seem to be exactly the same size and shape as the pacesetters which makes me wonder if when people complain they have to grind them down to fit and clear spark plug holes if they are using the cheaper $120 headers sold on ebay...
0 2012/02/27 13:30:11
2012 02 27 15.21.15
2012 02 27 15.21.15
0 2012/02/27 13:23:24
2012 02 27 15.29.13 Again the pic makes it look like the stainless ports are smaller when in fact they are 1/8 of and inch larger in both directions (actual hole not just flange cut out...
2012 02 27 15.29.13 Again the pic makes it look like the stainless ports are smaller when in fact they are 1/8 of and inch larger in both directions (actual hole not just flange cut out...
0 2012/02/27 13:23:24
2012 02 27 15.27.47 this is the one spot where the pacesetter had 1/16" larger hole opening...(nothing I cant fix with the dremel real quick...
2012 02 27 15.27.47 this is the one spot where the pacesetter had 1/16" larger hole opening...(nothing I cant fix with the dremel real quick...
0 2012/02/27 13:23:24
2012 02 27 15.23.59 this is where the pacesetter id tag was welded but broke off...
2012 02 27 15.23.59 this is where the pacesetter id tag was welded but broke off...
0 2012/02/27 13:19:48
2012 02 27 15.22.38
2012 02 27 15.22.38
0 2012/02/27 13:19:48
2012 02 27 15.25.33 they are ported out pretty well...actually seem to be cleaned up and larger than the pacesetters but this is very close.. If I didnt know better I'd say they were made by the same company from certian angles..
2012 02 27 15.25.33 they are ported out pretty well...actually seem to be cleaned up and larger than the pacesetters but this is very close.. If I didnt know better I'd say they were made by the same company from certian angles..
0 2012/02/27 13:19:48
2012 02 27 15.24.58 the stainless ebay ones do have a thicker flange (1/8 or so thicker)...
2012 02 27 15.24.58 the stainless ebay ones do have a thicker flange (1/8 or so thicker)...
0 2012/02/27 13:17:11
2012 02 27 15.24.29
2012 02 27 15.24.29
0 2012/02/27 13:17:11
2012 02 27 15.21.25
2012 02 27 15.21.25
0 2012/02/27 13:13:23
2012 02 27 15.23.12
2012 02 27 15.23.12
0 2012/02/27 13:13:23
Advertisement