DodgeForum.com
Share Your Pictures with Our Community. Upload Now
0 2023/06/25 11:39:09
0 2023/06/25 11:39:03
0 2023/06/25 08:37:19
0 2023/06/25 07:50:20
Random wires that were seemingly soldered in the past
Random wires that were seemingly soldered in the past
0 2023/06/24 18:31:13
Sensor I purchased
Sensor I purchased
0 2023/06/24 18:31:03
Inside of the driver mirror
Inside of the driver mirror
0 2023/06/24 18:30:04
0 2023/06/24 12:25:43
0 2023/06/24 12:25:38
0 2023/06/23 14:40:32
0 2023/06/23 14:40:26
0 2023/06/23 14:18:21
Advertisement
0 2023/06/23 06:17:50
0 2023/06/22 17:11:00
0 2023/06/21 15:53:49
0 2023/06/21 15:53:43
0 2023/06/21 15:53:37
0 2023/06/21 15:53:29
0 2023/06/21 15:50:53
0 2023/06/21 15:50:47
0 2023/06/21 15:50:40
0 2023/06/21 15:50:31
Scat pack door cards
Scat pack door cards
0 2023/06/21 11:59:38
RT doors
RT doors
0 2023/06/21 11:59:34
0 2023/06/21 11:53:02
0 2023/06/21 11:51:48
0 2023/06/21 10:04:42
It’s done. They’re in tight. TBH, I don’t think it’d be possible to torque the top bolt anyway, due to the piston spinning in the bushing, even when tight.
It’s done. They’re in tight. TBH, I don’t think it’d be possible to torque the top bolt anyway, due to the piston spinning in the bushing, even when tight.
0 2023/06/20 23:27:53
Back side of the manifold showing all holes and with house key for perspective.
Back side of the manifold showing all holes and with house key for perspective.
0 2023/06/20 18:02:52
Shows comparison to other (regular holes) - comparison of diameters between the holes in the center of the manifold compared to those at the extremities of the manifold.
Shows comparison to other (regular holes) - comparison of diameters between the holes in the center of the manifold compared to those at the extremities of the manifold.
0 2023/06/20 18:02:50
With house key to give some perspective on size. The hole that passes through into the head (at the bottom of the larger diameter hole) is about half the diameter of the larger one.
With house key to give some perspective on size. The hole that passes through into the head (at the bottom of the larger diameter hole) is about half the diameter of the larger one.
0 2023/06/20 18:02:49
Its shaped like its counter sunk. Depth is probably around an inch or inch and a quarter (just to give some perspective). The hole at the bottom is smaller diameter then the diameter at the face (like something that is counter sunk or something).
Its shaped like its counter sunk. Depth is probably around an inch or inch and a quarter (just to give some perspective). The hole at the bottom is smaller diameter then the diameter at the face (like something that is counter sunk or something).
0 2023/06/20 18:02:47
Advertisement