DodgeForum.com
Share Your Pictures with Our Community. Upload Now
318 cid crate motor, which was actually surplus for an M880/890, it was still in a styrofoam filled crate. It has an edelbrock aluminum manifold with a edelbrock four barrel carburetor on top. Also has a nice set of moroso valve covers. When I can find a set of headers that I can afford it will have them also.
318 cid crate motor, which was actually surplus for an M880/890, it was still in a styrofoam filled crate. It has an edelbrock aluminum manifold with a edelbrock four barrel carburetor on top. Also has a nice set of moroso valve covers. When I can find a set of headers that I can afford it will have them also.
0 2022/05/05 13:09:46
Front winch bumper off of an old Ford F-150 sporting a 12,000 lb. Winch from Harbour Frieght.
Front winch bumper off of an old Ford F-150 sporting a 12,000 lb. Winch from Harbour Frieght.
0 2022/05/05 13:05:48
1985 Dodge W350 4X4 cloned to look as close to a M880 as I could. Side rails were modified from some old deuce and a half side rails.
1985 Dodge W350 4X4 cloned to look as close to a M880 as I could. Side rails were modified from some old deuce and a half side rails.
0 2022/05/05 13:05:42
0 2022/05/05 08:54:30
0 2022/05/05 08:53:12
0 2022/05/04 22:11:26
0 2022/05/04 22:04:39
0 2022/05/04 22:04:34
0 2022/05/04 22:04:29
0 2022/05/04 22:04:25
0 2022/05/04 14:27:32
0 2022/05/04 14:00:23
Advertisement
0 2022/05/04 14:00:18
0 2022/05/04 14:00:13
Prom night with the best!
Prom night with the best!
0 2022/05/04 09:58:26
My RT's first prom date!
My RT's first prom date!
0 2022/05/04 09:52:57
0 2022/05/04 07:19:08
0 2022/05/04 04:48:26
0 2022/05/02 21:18:26
I think this is right to the best of my ability
I think this is right to the best of my ability
0 2022/05/02 19:27:40
0 2022/05/02 19:27:33
0 2022/05/02 19:27:25
0 2022/05/02 19:27:20
0 2022/05/02 19:27:14
0 2022/05/02 19:25:17
Also what are those two long bars called and how do I fine replacement parts for it the rubber things are worn out really bad they measure roughly 19inch long 5 inch in diameter and the bushing length is like 3inchs long
Also what are those two long bars called and how do I fine replacement parts for it the rubber things are worn out really bad they measure roughly 19inch long 5 inch in diameter and the bushing length is like 3inchs long
0 2022/05/02 19:25:12
0 2022/05/02 19:25:06
0 2022/05/02 19:24:59
0 2022/05/02 17:04:45
0 2022/05/02 17:03:39
0 2022/05/02 17:03:31
0 2022/05/02 17:03:25
Advertisement