DodgeForum.com
Look at the crud I blew out of the vent hose from the driverside valve cover to the upper intake plenum???? Not good!
Look at the crud I blew out of the vent hose from the driverside valve cover to the upper intake plenum???? Not good!
0 2020/02/16 16:54:33
Slide plenum onto intake manifold without the gasket. Move the plenum into place and tip it to the passenger side of the vehicle. Slide the gasket in and tighten! Easy peasey!
Slide plenum onto intake manifold without the gasket. Move the plenum into place and tip it to the passenger side of the vehicle. Slide the gasket in and tighten! Easy peasey!
0 2020/02/16 20:56:42
0 2020/02/16 21:10:04
Only broke on plastic hose clip!
Only broke on plastic hose clip!
0 2020/02/17 00:48:10
That's the end of the manifold where the thermostat bolts on. I suppose I could remove the manifold and run some water thru it to see if any pours thru the ports?
That's the end of the manifold where the thermostat bolts on. I suppose I could remove the manifold and run some water thru it to see if any pours thru the ports?
0 2020/02/17 23:04:35
Look at the front two cylinders. Clean compared to the other 8? Does that just mean it started flooding from the back and didnt run long enough to get to the front two cylinders?
Look at the front two cylinders. Clean compared to the other 8? Does that just mean it started flooding from the back and didnt run long enough to get to the front two cylinders?
0 2020/02/18 13:35:14
0 2020/03/04 07:10:07
0 2020/03/04 17:36:01
Looks like the mice had some fun!
Looks like the mice had some fun!
0 2020/03/04 17:36:47
0 2020/03/06 06:00:11
0 2020/03/07 16:04:29
0 2020/03/07 16:04:55
0 2020/03/07 16:05:16
Looks like a sweaty valve cover?
Looks like a sweaty valve cover?
0 2020/03/07 17:08:14
0 2021/02/15 13:39:05
0 2021/02/15 13:42:30
0 2021/02/15 13:43:30
0 2021/02/15 13:49:04
0 2021/02/15 13:49:34
0 2021/02/15 18:35:42
0 2021/02/15 19:10:59
1993 C240 4cyl Isuzu Diesel Generator
1993 C240 4cyl Isuzu Diesel Generator
0 2021/02/20 12:26:42
Mini van ignition
Mini van ignition
0 2021/02/22 13:07:42
0 2021/02/22 13:08:40
Hoods off time to get in shop
Hoods off time to get in shop
0 2021/02/22 13:09:36
0 2021/02/22 14:49:30
This white wire is broken off and I couldnt find any harness or plug it went to? Any one??
This white wire is broken off and I couldnt find any harness or plug it went to? Any one??
0 2021/02/22 16:33:29
The only thing that is missing a wire is that red pinch clamp! Looks like its gotta be a hack in from one of those stereo hacks I paid to install my remote start?
The only thing that is missing a wire is that red pinch clamp! Looks like its gotta be a hack in from one of those stereo hacks I paid to install my remote start?
0 2021/02/22 21:01:51
0 2021/02/22 21:05:35
0 2021/02/23 09:58:17
No plastic pinch clamp???? Now what?
No plastic pinch clamp???? Now what?
0 2021/02/23 10:16:05
Bottom hose has a 1 foot chunk to a threaded piece! Git er done!
Bottom hose has a 1 foot chunk to a threaded piece! Git er done!
0 2021/02/23 10:39:18
Original engine
Original engine
0 2021/02/23 10:43:47
Donor engine
Donor engine
0 2021/02/23 10:44:15
Something is keep n the engine from split n apart from the trans? All the bellhousing bolts are out. The engine mounts have canada written all over them, eh! 21mm nut and 18mm bolt! On an american vehicle18mm socket is a unicorn in my tool box!!! Eh!
Something is keep n the engine from split n apart from the trans? All the bellhousing bolts are out. The engine mounts have canada written all over them, eh! 21mm nut and 18mm bolt! On an american vehicle18mm socket is a unicorn in my tool box!!! Eh!
0 2021/02/23 19:22:14
0 2021/02/24 13:46:56
Is it because donor engine is was a 2wd. Short bolts were for the 4wd?
Is it because donor engine is was a 2wd. Short bolts were for the 4wd?
0 2021/02/24 13:47:29
0 2021/02/24 18:37:33
0 2021/02/24 18:38:03
Numbers almost the same.
Numbers almost the same.
0 2021/02/24 18:38:48