DodgeForum.com
0 2020/04/18 16:01:58
Voltage on the new circuit.
Voltage on the new circuit.
0 2020/04/18 16:02:05
0 2020/04/18 16:02:10
Here you go gents, street legal and under 55 watts. I like the bulbs, ran them last night and they are pretty clear and performed much better. Setting up the led lights today, have to modify some things, but building the relay harness from spare parts lying around the garage.
Here you go gents, street legal and under 55 watts. I like the bulbs, ran them last night and they are pretty clear and performed much better. Setting up the led lights today, have to modify some things, but building the relay harness from spare parts lying around the garage.
0 2020/04/19 12:25:07
My kingdom for a drill press today, but made it work.
My kingdom for a drill press today, but made it work.
0 2020/04/20 19:54:40
Got one side done today, but will try and finish the other side tomorrow.
Got one side done today, but will try and finish the other side tomorrow.
0 2020/04/20 19:54:53
Using the stock switch. Had to play with the volt meter , but think I have it worked out.
Using the stock switch. Had to play with the volt meter , but think I have it worked out.
0 2020/04/20 19:55:15
Using the relay from the donor dash and 12 gauge wire.
Using the relay from the donor dash and 12 gauge wire.
0 2020/04/20 19:55:26
0 2020/04/20 22:59:31
0 2020/04/21 17:31:25
0 2020/04/21 17:32:59
Wanted share this with the group for anyone else doing LED and wanting to keep the stock looking fog light switch. For the wires what I used the wire coming from power to the switch hooked up the brown and white wire, the power out from the switch going to relay was ran from the small black and orange looking ground wire, I didn’t mess with the orange wire for the dash illuminator or the blue wire, or other heavier gauge ground. The wire from the switch (small looking ground) went to t
Wanted share this with the group for anyone else doing LED and wanting to keep the stock looking fog light switch. For the wires what I used the wire coming from power to the switch hooked up the brown and white wire, the power out from the switch going to relay was ran from the small black and orange looking ground wire, I didn’t mess with the orange wire for the dash illuminator or the blue wire, or other heavier gauge ground. The wire from the switch (small looking ground) went to t
0 2020/04/21 18:40:55
Epoxy primer the Gen 4 for bumper yesterday, going to slap it on here momentarily.
Epoxy primer the Gen 4 for bumper yesterday, going to slap it on here momentarily.
0 2020/04/22 15:33:58
Finally got the Gen 4 bumper installed. The right light is off a bit and will have to readjust it, but everything else can put pretty clean.
Finally got the Gen 4 bumper installed. The right light is off a bit and will have to readjust it, but everything else can put pretty clean.
0 2020/04/23 08:38:51
Now it’s time to finish the body work next week and prep for the final coat.
Now it’s time to finish the body work next week and prep for the final coat.
0 2020/04/25 11:19:10
Don’t know if this helps anyone, but here’s a color swatch of grays from ACC: From left to right Medium Gray Pewter 9779 Medium Gray 8075A Gray-Sand Medium Gray 857 Dark Gray 807
Don’t know if this helps anyone, but here’s a color swatch of grays from ACC: From left to right Medium Gray Pewter 9779 Medium Gray 8075A Gray-Sand Medium Gray 857 Dark Gray 807
0 2020/04/26 11:14:25
Back at the body work today. My painter maestro let me borrow his stud welder, simple harbor freight one, but is doing the job.
Back at the body work today. My painter maestro let me borrow his stud welder, simple harbor freight one, but is doing the job.
0 2020/05/05 13:15:39
Pulling out some dents today, my painter brother is teaching me with some OTJ. Using a simple Harbor Freight stud welder and slide hammer.
Pulling out some dents today, my painter brother is teaching me with some OTJ. Using a simple Harbor Freight stud welder and slide hammer.
0 2020/05/05 18:55:42
Just need to mud it and we are off and running.
Just need to mud it and we are off and running.
0 2020/05/05 18:55:52
Auto body friend of mine spun me up today on the stud welder and slide hammer. Simple Harbor Freight job but worked pretty well.
Auto body friend of mine spun me up today on the stud welder and slide hammer. Simple Harbor Freight job but worked pretty well.
0 2020/05/05 20:05:12
Will apply some mud and sand it down tomorrow.
Will apply some mud and sand it down tomorrow.
0 2020/05/05 20:05:19
0 2020/06/19 20:48:32
0 2020/06/19 20:48:41
0 2020/06/19 20:48:51
0 2020/06/19 20:48:59
0 2020/06/19 20:49:08
0 2020/06/19 20:49:28
0 2020/06/19 20:49:38
0 2020/06/19 20:49:47
0 2020/06/19 20:49:54
0 2020/06/19 20:50:02
0 2020/06/19 20:52:08
0 2020/06/19 20:52:36
0 2020/06/19 20:52:45
ACC carpet kit being laid out. Getting back at the project this weekend.
ACC carpet kit being laid out. Getting back at the project this weekend.
0 2020/06/19 20:53:00
Still need to finish the install. This is a dry fit, figure I will let the sun stretch out the material.
Still need to finish the install. This is a dry fit, figure I will let the sun stretch out the material.
0 2020/06/19 20:53:21
Wires for the extra 12 volt plus for the cushion center console.
Wires for the extra 12 volt plus for the cushion center console.
0 2020/06/19 20:53:31
Seats and console reinstalled. Still need to stain the console and secure it.
Seats and console reinstalled. Still need to stain the console and secure it.
0 2020/06/19 20:53:38
0 2020/06/19 20:53:46
0 2020/06/20 21:28:28