DodgeForum.com
0 2020/07/11 10:36:16
0 2020/07/11 10:36:46
0 2020/07/11 10:36:58
0 2020/07/11 10:37:10
0 2020/07/11 10:37:22
rotate so two of sprocket holes around 4 and 10 o'clock
rotate so two of sprocket holes around 4 and 10 o'clock
0 2020/07/11 10:39:27
Here is rental tool with couple of machine screws I found in garage
Here is rental tool with couple of machine screws I found in garage
0 2020/07/11 10:39:39
0 2020/07/11 10:39:51
0 2020/07/11 10:40:02
align smallest holes on rental tool with holes in sprocket and insert screws
align smallest holes on rental tool with holes in sprocket and insert screws
0 2020/07/11 10:40:14
rotate sprocket so two holes positioned roughly at 4 and 10 o'clock positions
rotate sprocket so two holes positioned roughly at 4 and 10 o'clock positions
0 2020/07/11 10:42:59
clutch holding tool from autozone
clutch holding tool from autozone
0 2020/07/11 10:43:11
Here you can see end of machine screw through the sprocket
Here you can see end of machine screw through the sprocket
0 2020/07/11 10:43:23
Using breaker bar bust the nut loose
Using breaker bar bust the nut loose
0 2020/07/11 10:43:34
align small hole in rental tool with holes in sprocket
align small hole in rental tool with holes in sprocket
0 2020/07/11 10:43:45
hard to see but right side has two marks as well
hard to see but right side has two marks as well
0 2020/07/11 13:08:16
0 2020/07/11 13:08:28
0 2020/07/11 13:08:40
left side, two marks on timing chain
left side, two marks on timing chain
0 2020/07/11 13:08:52
0 2020/07/18 15:54:41
seat from 3 to about 7 o'clock much larger than rest of the seat
seat from 3 to about 7 o'clock much larger than rest of the seat
0 2020/07/24 12:56:42
47LKQ intake manifold gasket
47LKQ intake manifold gasket
0 2020/08/28 16:09:04
cooler, crimp, bottom of hose
cooler, crimp, bottom of hose
0 2021/12/06 11:41:13
bottom of hose and oil cooler
bottom of hose and oil cooler
0 2021/12/06 11:41:19
zoom of leak at crimped part of hose
zoom of leak at crimped part of hose
0 2021/12/06 11:41:39