DodgeForum.com
This is what it looked like when I picked it up from Salina, I figured I couldn't go wrong with $250
This is what it looked like when I picked it up from Salina, I figured I couldn't go wrong with $250
0 2014/12/11 05:47:28
This is what the trailer looked like before paint. Notice I built up the sides and front out of 1/4 angle and 1" square tubing. I built receivers into the bottom piece of angle so that the sides are removable by pulling 3 pins per section.
This is what the trailer looked like before paint. Notice I built up the sides and front out of 1/4 angle and 1" square tubing. I built receivers into the bottom piece of angle so that the sides are removable by pulling 3 pins per section.
0 2014/12/11 05:48:05
0 2014/12/11 05:49:05
Lights I installed on the old build.
Lights I installed on the old build.
0 2014/12/11 05:47:42
Before paint from the back.
Before paint from the back.
0 2014/12/11 05:48:16
0 2014/12/11 05:48:58
0 2014/12/11 05:48:36
0 2014/12/11 05:49:17
Hauling a corn lister from my grandfathers farm.
Hauling a corn lister from my grandfathers farm.
0 2014/12/11 05:47:52
0 2014/12/11 05:49:37
When I started removing the decking, I noticed there was a lot of it.... Layer 1 was OSB
When I started removing the decking, I noticed there was a lot of it.... Layer 1 was OSB
0 2014/12/11 05:49:38
First coat of paint. (Rust oleum rubberized undercoating. I do not recommend this product, it seemed like it never dried (still tacky after 3 days or so))
First coat of paint. (Rust oleum rubberized undercoating. I do not recommend this product, it seemed like it never dried (still tacky after 3 days or so))
0 2014/12/11 05:48:26
0 2014/12/11 05:49:28
0 2014/12/11 05:48:46
Layer 2 was Masonite.
Layer 2 was Masonite.
0 2014/12/11 05:49:41
Layer 3 was 3/4 foam board insulation. (Apparently this was an old pop-up camper).
Layer 3 was 3/4 foam board insulation. (Apparently this was an old pop-up camper).
0 2014/12/11 05:49:42
Final from front
Final from front
0 2014/12/11 05:59:12
And finally layer 4, more OSB with a 2x4 frame to hold in the insulation and add to the rigidity of the trailer.
And finally layer 4, more OSB with a 2x4 frame to hold in the insulation and add to the rigidity of the trailer.
0 2014/12/11 05:49:43
Final from back
Final from back
0 2014/12/11 05:59:14