DodgeForum.com
This is the ole girl. Pic from this past week.
This is the ole girl. Pic from this past week.
0 2015/12/01 20:28:00
0 2015/12/05 14:52:45
0 2015/12/05 14:53:00
0 2015/12/05 14:53:15
0 2015/12/05 14:53:30
0 2015/12/05 14:53:44
0 2015/12/05 14:53:59
0 2015/12/05 14:54:15
0 2015/12/05 14:54:30
0 2015/12/05 14:54:53
mounting hardware
mounting hardware
0 2015/12/12 20:46:31
catch can oil separator insert w/ o-ring holding it inlace. Best to start the o-ring behind the protruding part and work it into the o-ring shoulder where your finger can help guide it in.
catch can oil separator insert w/ o-ring holding it inlace. Best to start the o-ring behind the protruding part and work it into the o-ring shoulder where your finger can help guide it in.
0 2015/12/12 20:46:46
tope down view, start behind the protruding portion because you cannot get your fingers in there, finish on the other side fitting o-ring into groove.
tope down view, start behind the protruding portion because you cannot get your fingers in there, finish on the other side fitting o-ring into groove.
0 2015/12/12 20:48:48
This portion of the oil insert goes to the valve cover side so the oil must drain down through the whole lower protrusion before the gases can come back up the other side. This helps separate the oil from the gases.
This portion of the oil insert goes to the valve cover side so the oil must drain down through the whole lower protrusion before the gases can come back up the other side. This helps separate the oil from the gases.
0 2015/12/12 20:49:02
Inside the lid.
Inside the lid.
0 2015/12/12 20:49:17
Inside the oil separator insert. Looks like steel wool. The o-ring on the counter that holds the insert into place.
Inside the oil separator insert. Looks like steel wool. The o-ring on the counter that holds the insert into place.
0 2015/12/12 20:49:34
Instructions.
Instructions.
0 2015/12/12 20:49:48
Oil insert installed and ready for action, the lower section of course needs to be screwed on. This unit looks REAL nice and well thought out.
Oil insert installed and ready for action, the lower section of course needs to be screwed on. This unit looks REAL nice and well thought out.
0 2015/12/12 20:50:00
all together, just need to cut the line, and run them to their respective terminations.
all together, just need to cut the line, and run them to their respective terminations.
0 2015/12/12 20:50:11
look how smooth that is! GREAT piece! Notice the fronts are not taken off like I THINK? another producer of these throttle bodies does.. no complaints here though. :)
look how smooth that is! GREAT piece! Notice the fronts are not taken off like I THINK? another producer of these throttle bodies does.. no complaints here though. :)
0 2015/12/12 21:10:20
Instruction sheet for resetting the PCM.
Instruction sheet for resetting the PCM.
0 2015/12/12 21:10:37
The new gasket he includes when you purchase the honed throttle body.
The new gasket he includes when you purchase the honed throttle body.
0 2015/12/12 21:10:49
Other side of the throttle body. Probably the top side?
Other side of the throttle body. Probably the top side?
0 2015/12/12 21:11:03
Bottom side of the throttle body.
Bottom side of the throttle body.
0 2015/12/12 21:11:19
What you get when you order the "kit".
What you get when you order the "kit".
0 2015/12/12 21:11:33
Super pretty. I think he paints them? I am not sure, they look so damn good when he is finished!
Super pretty. I think he paints them? I am not sure, they look so damn good when he is finished!
0 2015/12/12 21:13:18
Instructions for install and resetting PCM.
Instructions for install and resetting PCM.
0 2015/12/12 21:13:34
Gasket the guy includes with the purchase of the throttle body.
Gasket the guy includes with the purchase of the throttle body.
0 2015/12/12 21:13:46
Topside of the throttle body? Or is this the bottom? Haven't taken it off yet, not sure.
Topside of the throttle body? Or is this the bottom? Haven't taken it off yet, not sure.
0 2015/12/12 21:14:00
Bottom (I think) side of the throttle body set back a bit to see how pretty the transitions are :)
Bottom (I think) side of the throttle body set back a bit to see how pretty the transitions are :)
0 2015/12/12 21:14:16
Whole "kit" you get when purchasing the throttle body
Whole "kit" you get when purchasing the throttle body
0 2015/12/12 21:14:30
0 2015/12/12 21:16:06
0 2015/12/12 21:16:23
0 2015/12/12 21:16:35
0 2015/12/12 21:16:50
0 2015/12/12 21:17:06
0 2015/12/12 21:17:21
wire connector
wire connector
0 2015/12/12 21:32:58
wire route
wire route
0 2015/12/12 21:33:13
all splayed out
all splayed out
0 2015/12/12 21:33:28