DodgeForum.com
Full gasket set
Full gasket set
0 2016/01/13 18:35:34
Sealed power = Fel-pro?
Sealed power = Fel-pro?
0 2016/01/13 18:38:05
0 2016/01/14 21:50:25
0 2016/01/14 21:51:49
My cam specs
My cam specs
0 2016/01/17 22:29:50
Lock ring directions
Lock ring directions
0 2016/01/23 19:23:17
Here is the piston with pin and rod together, just waiting for second lock ring
Here is the piston with pin and rod together, just waiting for second lock ring
0 2016/01/23 19:24:29
These things are a pain to install!!
These things are a pain to install!!
0 2016/01/23 19:24:50
Another shot to show what they look like.
Another shot to show what they look like.
0 2016/01/23 19:25:11
Installed
Installed
0 2016/01/23 19:25:35
All my ducks in a row waiting to be installed.
All my ducks in a row waiting to be installed.
0 2016/01/23 19:25:56
My best friend on this build... Lubriplate. I have 2 of these. :)
My best friend on this build... Lubriplate. I have 2 of these. :)
0 2016/01/23 19:27:19
Little lube shot.
Little lube shot.
0 2016/01/23 19:28:01
This is the balance sheet that came with the crank.
This is the balance sheet that came with the crank.
0 2016/01/23 19:28:35
Crank just waiting for everything else.
Crank just waiting for everything else.
0 2016/01/23 19:29:15
Heavy metal that was added for balancing. #5 main cap behind it.
Heavy metal that was added for balancing. #5 main cap behind it.
0 2016/01/23 19:29:50
More heavy metal for balancing. Forward most counter weight.
More heavy metal for balancing. Forward most counter weight.
0 2016/01/23 19:30:15
Measuring oil pan depth for setting the pick up tube. 8.75"
Measuring oil pan depth for setting the pick up tube. 8.75"
0 2016/01/23 19:30:43
Setting the pickup tube. Set to 8.5". Should leave about 1/4" gap between the pick up and the pan.
Setting the pickup tube. Set to 8.5". Should leave about 1/4" gap between the pick up and the pan.
0 2016/01/23 19:31:59
Lock ring install guide.
Lock ring install guide.
0 2016/01/23 19:50:53
Just waiting for the second lock ring.
Just waiting for the second lock ring.
0 2016/01/23 19:53:23
These things are a pain to install!!!
These things are a pain to install!!!
0 2016/01/23 19:54:38
Another view of the lock ring.
Another view of the lock ring.
0 2016/01/23 19:55:23
Installed.
Installed.
0 2016/01/23 19:56:59
All ready to go in.
All ready to go in.
0 2016/01/23 19:57:58
Good stuff!
Good stuff!
0 2016/01/23 20:01:01
Getting ready.
Getting ready.
0 2016/01/23 20:03:58
Balance sheet for the crank.
Balance sheet for the crank.
0 2016/01/23 20:05:42
Crank waiting for the other goodies.
Crank waiting for the other goodies.
0 2016/01/23 20:06:30
Heavy metal for balancing. #5 main cap behind it.
Heavy metal for balancing. #5 main cap behind it.
0 2016/01/23 20:08:31
Forward most counter weight. More heavy metal.
Forward most counter weight. More heavy metal.
0 2016/01/23 20:09:58
Measuring the oil pan depth to set the pickup tube. 8.75"
Measuring the oil pan depth to set the pickup tube. 8.75"
0 2016/01/23 20:12:48
Setting the tube at 8.5". Should leave about 1/4" between the tube and the pan.
Setting the tube at 8.5". Should leave about 1/4" between the tube and the pan.
0 2016/01/23 20:14:54
Measuring the oil pan depth to set the pickup tube. 8.75"
Measuring the oil pan depth to set the pickup tube. 8.75"
0 2016/01/23 20:18:00
Setting the pickup tube at 8.5". Should leave about 1/4" gap between the pickup and pan.
Setting the pickup tube at 8.5". Should leave about 1/4" gap between the pickup and pan.
0 2016/01/23 20:19:10
Measuring oil pan depth to set the pickup tube. 8.75" deep.
Measuring oil pan depth to set the pickup tube. 8.75" deep.
0 2016/01/23 20:24:23
Setting the pick up tube. 8.5"
Setting the pick up tube. 8.5"
0 2016/01/23 20:28:07
Tightening sequence and torque specs. Tighten in 3 stages... 24 inch pounds, then 48 inch pounds, then final torque at 84 inch pounds.
Tightening sequence and torque specs. Tighten in 3 stages... 24 inch pounds, then 48 inch pounds, then final torque at 84 inch pounds.
0 2016/01/30 23:26:21
Broken at the adjuster.
Broken at the adjuster.
0 2016/02/11 20:06:20
This is how it was packed, with a piece of cardboard over.
This is how it was packed, with a piece of cardboard over.
0 2016/02/11 20:07:07