DodgeForum.com
my 74 restoration project, bought as a parts car for $2700
my 74 restoration project, bought as a parts car for $2700
0 2021/11/09 07:36:23
before the lift with lowering kit from PO
before the lift with lowering kit from PO
0 2021/11/09 07:35:40
5100 shocks and lift with 34" tires.. bye bye MPG
5100 shocks and lift with 34" tires.. bye bye MPG
0 2021/11/09 07:35:21
0 2021/09/09 08:08:17
its kind of a poor pic but thats what I use for deer hunting...
its kind of a poor pic but thats what I use for deer hunting...
0 2012/04/09 16:48:44
I sent my bolt to be cut and modified with a bend down and swept back... also had a safety ring put on the safety to make it easier to use...
I sent my bolt to be cut and modified with a bend down and swept back... also had a safety ring put on the safety to make it easier to use...
0 2012/04/09 16:48:44
sanded the rusty barrel smooth as a babies ass and reblued...
sanded the rusty barrel smooth as a babies ass and reblued...
0 2012/04/09 16:45:56
"floating" the barrel
"floating" the barrel
0 2012/04/09 16:45:56
richard stocks grade A rough cut walnut stock... I had to do some chiseling and filing as well as a lot of sanding to.
richard stocks grade A rough cut walnut stock... I had to do some chiseling and filing as well as a lot of sanding to.
0 2012/04/09 16:45:56
it was very pitted and was painted black I believe when reissued during the cold war...
it was very pitted and was painted black I believe when reissued during the cold war...
0 2012/04/09 16:41:58
I cut about 6" off the very long counterbored barrel and recrowned it...
I cut about 6" off the very long counterbored barrel and recrowned it...
0 2012/04/09 16:41:58
non numbers matching mess... but the rifling is still good so perfect for my project..
non numbers matching mess... but the rifling is still good so perfect for my project..
0 2012/04/09 16:41:58
stock throttlebody with airhorns and restrictions
stock throttlebody with airhorns and restrictions
0 2012/03/03 09:36:43
2012 03 03 12.20.47
2012 03 03 12.20.47
0 2012/03/03 09:36:43
2012 03 03 12.19.42
2012 03 03 12.19.42
0 2012/03/03 09:34:51
2012 03 03 12.18.41
2012 03 03 12.18.41
0 2012/03/03 09:34:51
2012 03 03 12.18.31
2012 03 03 12.18.31
0 2012/03/03 09:34:51
2012 03 03 10.35.11
2012 03 03 10.35.11
0 2012/03/03 09:27:53
2012 03 02 22.38.31
2012 03 02 22.38.31
0 2012/03/03 09:27:53
2012 03 02 22.37.59
2012 03 02 22.37.59
0 2012/03/03 09:27:53
2012 02 27 15.25.33 as far as clearances on the flange they seem to be exactly the same size and shape as the pacesetters which makes me wonder if when people complain they have to grind them down to fit and clear spark plug holes if they are using the cheaper $120 headers sold on ebay...
2012 02 27 15.25.33 as far as clearances on the flange they seem to be exactly the same size and shape as the pacesetters which makes me wonder if when people complain they have to grind them down to fit and clear spark plug holes if they are using the cheaper $120 headers sold on ebay...
0 2012/02/27 13:30:11
2012 02 27 15.26.12 this pcesetter header developed a leak in the center of the collector area... the welds look uneven and sloppy compared to the ebay ones..
2012 02 27 15.26.12 this pcesetter header developed a leak in the center of the collector area... the welds look uneven and sloppy compared to the ebay ones..
0 2012/02/27 13:30:11
2012 02 27 15.27.26 the question remains to be seen how well these will bolt up without havint to readjust head pipes going to the cat.
2012 02 27 15.27.26 the question remains to be seen how well these will bolt up without havint to readjust head pipes going to the cat.
0 2012/02/27 13:30:11
2012 02 27 15.27.47 this is the one spot where the pacesetter had 1/16" larger hole opening...(nothing I cant fix with the dremel real quick...
2012 02 27 15.27.47 this is the one spot where the pacesetter had 1/16" larger hole opening...(nothing I cant fix with the dremel real quick...
0 2012/02/27 13:23:24
2012 02 27 15.29.13 Again the pic makes it look like the stainless ports are smaller when in fact they are 1/8 of and inch larger in both directions (actual hole not just flange cut out...
2012 02 27 15.29.13 Again the pic makes it look like the stainless ports are smaller when in fact they are 1/8 of and inch larger in both directions (actual hole not just flange cut out...
0 2012/02/27 13:23:24
2012 02 27 15.21.15
2012 02 27 15.21.15
0 2012/02/27 13:23:24
2012 02 27 15.25.33 they are ported out pretty well...actually seem to be cleaned up and larger than the pacesetters but this is very close.. If I didnt know better I'd say they were made by the same company from certian angles..
2012 02 27 15.25.33 they are ported out pretty well...actually seem to be cleaned up and larger than the pacesetters but this is very close.. If I didnt know better I'd say they were made by the same company from certian angles..
0 2012/02/27 13:19:48
2012 02 27 15.22.38
2012 02 27 15.22.38
0 2012/02/27 13:19:48
2012 02 27 15.23.59 this is where the pacesetter id tag was welded but broke off...
2012 02 27 15.23.59 this is where the pacesetter id tag was welded but broke off...
0 2012/02/27 13:19:48
2012 02 27 15.24.29
2012 02 27 15.24.29
0 2012/02/27 13:17:11
2012 02 27 15.24.58 the stainless ebay ones do have a thicker flange (1/8 or so thicker)...
2012 02 27 15.24.58 the stainless ebay ones do have a thicker flange (1/8 or so thicker)...
0 2012/02/27 13:17:11
2012 02 27 15.23.12
2012 02 27 15.23.12
0 2012/02/27 13:13:23
2012 02 27 15.21.25
2012 02 27 15.21.25
0 2012/02/27 13:13:23
2012 02 27 15.20.52 I know from the angle the pic is taken the old pacesetters look to have thicker piping but its not...Its the same size..
2012 02 27 15.20.52 I know from the angle the pic is taken the old pacesetters look to have thicker piping but its not...Its the same size..
0 2012/02/27 13:07:39
2012 02 27 15.19.58 ironically the welds look way cleaner on the ebay stainless headers...
2012 02 27 15.19.58 ironically the welds look way cleaner on the ebay stainless headers...
0 2012/02/27 13:07:39
2012 02 27 15.19.45 so the ebay headers appear to be a very close knockoff of the pacesetters they asre replacing..
2012 02 27 15.19.45 so the ebay headers appear to be a very close knockoff of the pacesetters they asre replacing..
0 2012/02/27 13:07:39
girlfriend in the vette after I painted it this summer
girlfriend in the vette after I painted it this summer
0 2011/11/18 14:16:35
my lifted golf cart...giant toy theme
my lifted golf cart...giant toy theme
0 2009/11/02 07:21:20
my mercedes ssk kitcar
my mercedes ssk kitcar
0 2009/11/02 07:21:20
my vette and bike
my vette and bike
0 2009/11/02 07:21:20