CEO Ralph Gilles confirms the 2013 Dodge Viper
By: Patrick Rall | November 20, 2010
Forum Discussions
Rebuild 5.2 crank no start, possible timing?
I recently rebuilt my 5.2 .It was not a 100% full rebuild, I did use parts that were good. Replaced crank shaft, rods, pistons, timing gears and chain...
1
15
1998 Dodge Ram 1500 5.9L 4WD Vacuum Lines
Help. My 4WD is not working. The front drive shaft turns when the 4WD is engaged but the hubs are not locking. I have replaced the actuator. That d...
14
18.7k
1ST GEN RAM GENERAL DISCUSSION/NON-TECH
Howdy guys! After 14 long years I cussed at my Dad's oldtruck long enough to get the hood open! 98% sure Dad did a 360 swap but can't see the cast on ...
10
340
1ST GEN RAM GENERAL DISCUSSION/NON-TECH
Howdy guys! After 14 long years I cussed at my Dad's oldtruck long enough to get the hood open! 98% sure Dad did a 360 swap but can't see the cast on ...
10
340
On my RAM 1500 2001 I Have an Issue I need help everytime I turn my A/C or Heat on there is smoke coming out of the vents like something is burning I ...
7
137
I have a 2000 Dodge Ram 1500 with a 5.9 Magnum that has been bored .30 over, M1 intake, larger throttle body, jegs updated heads with arp bolts, polis...
6
311
Latest News
Check out the 2011 Dodge Challenger SRT8 392 and 2011 Dodge Charger R/T in your area!
By: Patrick Rall | November 12, 2010
Mopar SEMA Tease
By: admin | November 2, 2010
Mopar® Previews Customized Vehicles for 2010 SEMA Show
By: admin | November 2, 2010
2010 DodgeForum SEMA Coverage
By: admin | November 1, 2010