so... its been almost a month that my truck is outta commission, blown head gasket. its got warped heads. my question is this:
if I have a set of magnum 318 heads, will they fit on my LA 318?
also I have a 4bbl intake that I was thinkin bout putting on it yay or nay?

 

This may help http://board.moparts.org/ubbthreads/...40&Main=851383
http://www.popularhotrodding.com/tec..._engine_specs/

Dave

 

on chrysler small block to swap from a 2 bbl to a 4 bbl. most of the parts that go to the carb are different. most of the time the cable is longer, the trans linkage is different, and the cable bracket might be different what it is the pull pin of the 4 bbl carb is more forward and more to the drivers side. all swaps are not the same. just do your research. the main thing is that the carb is pulled all the way with out jamming at WOT.

 

This guy will probably know. http://www.ramscyl.com/chrysler.htm

 

thanks guys
sorry it takes me so long to reply now im home for the summer and I only have internet at my moms and without a running vehicle its kinda hard to get back and forth