No Bus
#31
Does it crank and run with the new PCM?
Stick the old one back in and see if you still get these codes.
It is possible that the CKP you bought was bad.
Whatever happened to that melted connector and the two mystery plugs?
What all has been replaced? (Long thread, short memory!)
Do you have a working cluster now?
Stick the old one back in and see if you still get these codes.
It is possible that the CKP you bought was bad.
Whatever happened to that melted connector and the two mystery plugs?
What all has been replaced? (Long thread, short memory!)
Do you have a working cluster now?
Last edited by Friar Tuck; 06-08-2016 at 12:18 AM.
#32
#33
#34
Is connector A the one towards the front of vehicle, not the one towards the back of truck? I am gonna try to put in new CKP tomorrow. I also have a new cam position sensor but will wait to put in. I think the 5.2 PCM is good but just gut feeling. The kid said it was good and said he would refund me if I had any problems.
#36
#37
So, it's been a while. Still haven't fixed the problem but talked to a mechanic that specializes in this stuff. He said I have the wrong computer. He told me to call the dealer with the VIN and they will give me the part number. I did. Dealer wants $650. for a PCM. He said I can order it from autozone. I haven't yet but it was around $320 from them. Just haven't had the $$ to spend on it yet. But this will be my next approach.
#38