You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
I recently purchased a Lockpick and want to install it myself I saw a utube clip that showed the removal on a 2009 Ram dash but mine has bucket seats and it seems that the trim around the shift lever has to be removed I can't seem to remove the chrome bezel around the gear shift I am afraid if I try to force it I will break it. It appears to be loose all around except for two places. Any help would be appreciated.
This ad is not displayed to registered and logged-in members. Register your free account today and become a member on Dodge Forums!
use a butter knife or something thin and work your way around it and pry gently. it has tabs that have ribs that friction lock. If you break it no big deal, i took mine out and put it back on and it dosent fit as tight.
I used a fingernail file on mine when I installed the Mopar iPod connector. Just take it slow and pry a little at a time. Do it evenly and it'll pop right out. While out, you could also use the time to sand and paint it. I did mine and painted it matte black. Best mod ever. It seemed like the sun was always bouncing off it into my eyes. Death to the Bling Ring!