[5th Gen : 08+]: P2308 Ignition Coil ? C ? Secondary Circuit
#1
P2308 Ignition Coil ? C ? Secondary Circuit
Hi Guys, First time posting , So forgive me, Its 2010 Dodge Grand C. 3.8 STX /271.000 miles. Replaced 4 Transmissions. So far on Factory Engine.1- On 6 th speed will start shaking, had to change to 5 speed. 2- Rocks on stopping . 3- Codes P0300 on two. P2308 on two. P0306 C 6 misfire. 4- Checked , Spark plugs, Coils, all good, BUT ,NO Spark on plug # 6. Checked Ignition Pack No spark on # 6. Checked with light tester , ON. Switched first the coil with 1 & 6 , still No spark on either Ignition Pack Nor Spark # 6. I replaced the Ignition Pack .. Nothing changed. So I returned it back. For money I don't have in first place. I'm still driving it Kids to school. . Drive rugh and getting worse, dies if Idle on Neutral. Ok if Idle on D. I Googled for PCM and ECM , to see if I could do something , No success . money is little tight , Pleeeeease Need hands on Help. For something I could do myself. Thanks in advance. I hope itsnt the motor !!!
Last edited by sam Ghafer; 04-25-2016 at 11:25 AM. Reason: Wrong auto correct
#2
" Checked Ignition Pack No spark on # 6. Checked with light tester , ON."
I'm more familiar with earlier model vans so can't be sure but if this statement means you checked the coil driver pulse from the PCM at #6 coil and the test light stayed on steady then it should mean you have a PCM problem. It should blink as the engine rotates.
I'm more familiar with earlier model vans so can't be sure but if this statement means you checked the coil driver pulse from the PCM at #6 coil and the test light stayed on steady then it should mean you have a PCM problem. It should blink as the engine rotates.