Another thing --- Airbag light - help please
#32
#37
So...
I have the 2003 service manuals...and I read the diagnostic procedure for this error...
One really strange thing was how to clear the codes out of the airbag module..
First disconnect the battery then disconnect the module
Second, install module and reconnect module
Third turn key to ON
Lastly hook up battery...
The third step is a little weird to me...but it is bolded in the book...
No light now for 50 miles...
Strange strange strange
Also the service manual states several times to check the yellow connectors...
I have the 2003 service manuals...and I read the diagnostic procedure for this error...
One really strange thing was how to clear the codes out of the airbag module..
First disconnect the battery then disconnect the module
Second, install module and reconnect module
Third turn key to ON
Lastly hook up battery...
The third step is a little weird to me...but it is bolded in the book...
No light now for 50 miles...
Strange strange strange
Also the service manual states several times to check the yellow connectors...
Last edited by funair02; 10-08-2014 at 10:05 AM.
#39
This has been the longest I have gone without the light in the last two months.
Over last weekend, I took the passenget seat out so I could get a better look at the wire for the seatbelt.
It seemed OK, but it did look like it was pinched under the side of the pedestal. And just pinched - not frayed or broken.
Now I have been holding off talking about this, because I didn't want to jinx myself.
But, if its gonna happen again it will.
So I moved the wire around to a place that wasn't pinched.
I have tried to make the light come on, and it hasn't.
Fingers crossed!!!!!
Over last weekend, I took the passenget seat out so I could get a better look at the wire for the seatbelt.
It seemed OK, but it did look like it was pinched under the side of the pedestal. And just pinched - not frayed or broken.
Now I have been holding off talking about this, because I didn't want to jinx myself.
But, if its gonna happen again it will.
So I moved the wire around to a place that wasn't pinched.
I have tried to make the light come on, and it hasn't.
Fingers crossed!!!!!