View Poll Results: A poll
Voters: 8. You may not vote on this poll
JET STAGE 2 OR MOPAR PCM
#1
03-25-2006, 04:03 PM
#2
03-31-2006, 06:15 AM
Record Breaker
Join Date: May 2005
Location: Wisconsin
Posts: 2,415
Likes: 0
Received 0 Likes
on
0 Posts
RE: JET STAGE 2 OR MOPAR PCM
Definitely the performance PCM.
You have to run premium with it, but in my opinion...if you're trying to increase performance through PCM changes and DON'T have to move up in octane grade as a result, you're definitely not gaining everything that you could...if you gain anything at all.
You have to run premium with it, but in my opinion...if you're trying to increase performance through PCM changes and DON'T have to move up in octane grade as a result, you're definitely not gaining everything that you could...if you gain anything at all.
#3
05-22-2006, 04:43 PM
RE: JET STAGE 2 OR MOPAR PCM
Jet stageII on a 5.9 Indy will cost rwhp not increase it. You can expect about
-3hp -3ftlb with the Jet stageII at the wheels
+15hp +19ftlb with MP PCM at the wheels
With a Jet StageII my 96 bogged off the line WOT. Never noticed a mileage change with it. Later with the MP PCM it would spin the tires, needed to roll the gas on street tires after with it (3.92 grs) On the 1/4 mile ran .3 seconds faster with the MP PCM and probably got an extra 2mpg.
IMHO, best to add cai and headers first then mp pcm
-3hp -3ftlb with the Jet stageII at the wheels
+15hp +19ftlb with MP PCM at the wheels
With a Jet StageII my 96 bogged off the line WOT. Never noticed a mileage change with it. Later with the MP PCM it would spin the tires, needed to roll the gas on street tires after with it (3.92 grs) On the 1/4 mile ran .3 seconds faster with the MP PCM and probably got an extra 2mpg.
IMHO, best to add cai and headers first then mp pcm
