So i went out to warm up my venge and it started fine. after five min, it sputtered for two min and died. I have replaced the ASM relays on the firewall and that didnt work, so i tried the crankshaft sensor. that didnt work. The fuel pump is working. i cant do the key dance because it is a 2000 and im getting no check engine lights. Im doing the distribitor next, thank goodness i have a parts car.(on the other hand if anyone needs parts, get at me) if i missed anything, can you guys let me kno

 

Check for voltage at the fuel pump If it stays 12 volts the FPR is OK , If the voltage is there then disappears the ASD could still be bad or the pump is not building pressure

 

it was the distributor. figured id change the big three first before messing around with anything else