Replacing Speakers In 95 Avenger w/Infinity
Uber Moderator
Joined: Jun 2005
Posts: 2,305
Likes: 0
From: Colorado Springs, CO
RE: Replacing Speakers In 95 Avenger w/Infinity
ORIGINAL: ccorson97
So how do I get around this? What do I need to do to make sure the new radio is set-up correctly?
ORIGINAL: silvercoupe97
Here's something I just remembered...if you just plug in the aftermarket wire harness (metra or whatever), you utilize the stock amp...thus utilizing the stock filters from the amp....problem with that is, your front door spkrs will sound muffled.
Here's something I just remembered...if you just plug in the aftermarket wire harness (metra or whatever), you utilize the stock amp...thus utilizing the stock filters from the amp....problem with that is, your front door spkrs will sound muffled.
If it is muffled, then run seperate speaker wires to the front doors.
I'm pretty sure it does get muffled, but try it anyway and post back.[sm=smiley20.gif]
Rookie
Joined: May 2005
Posts: 83
Likes: 0
From:
RE: Replacing Speakers In 95 Avenger w/Infinity
thats a good point 95_avenger but building a protective cup to go around the speaker or the use of dynomat will greatly decrease the distortion of the 6x9s... anything to keep the massive air flow from getting directly to the cones of the 6x9s will work
