check light
Thread Starter
Joined: Jul 2007
Posts: 5
Likes: 0
RE: check light
ok. was reading and 12 and 55 are normal. so does anyone now how i can get the Abs and Parking brake light to go away?
i have to disconnect my battery everytime i turn off my truck or i will go dead in about 20 mins.
i have to disconnect my battery everytime i turn off my truck or i will go dead in about 20 mins.
Champion
Joined: Dec 2003
Posts: 4,119
Likes: 5
From: Sycamore, Illinois (displaced to Arkansas)
RE: check light
Common cause of the parking brake and ABS light to stay on (when the parking brake is not set, of course 
) is failure of the rear wheel speed sensor. This is located on the top of the rear differential.
) is failure of the rear wheel speed sensor. This is located on the top of the rear differential.
Veteran
Joined: Jun 2007
Posts: 303
Likes: 0
RE: check light
thought I would add my problem to this thread. My ABS is showing code 4 "closed HCU RWAL reset switch" I performed the HCU test as described by the Mitchell book and came up with nothing. The HCU connector looks good and the 14 pin ABS connector looks good.
