cruze control ?s
#1
![Default](https://dodgeforum.com/forum/images/icons/icon1.gif)
Okay on my 93 Dakota I am having problems, with the cruze control. It seems to lose power to push my truck while going 75 and rps at 1800-2000 up a hill (Medum to larger size hills). The unit will quit if it needs to go above 2000 RPM, I have to use the petal. Oh corse when I use the petal everything is okay it just the cruze control. I have also down shifteditand manully and It will hold it at 3000 or higher. It seems like its problem is not working inbetween 2000-3000 and will not down**** on highway speedswhile using cruze control.I wanted to know if this is normal for them stock. Mine is no longer stock so I dont remember anymore. I first thought it is the vaccume. I repaced all lines and cecked all connections. Now I think ether the resivar or the unit. I putlower gears (3.9 and 33 tires)so I dont know if 2000 RPM is normal for 75Mph. And I do have a 5.9rt. I did check the vaccume and I cant remember the number but according to my book it was in a good range. At higher rpmsit dont lose too much book said it was still okay. So Is this normal 90s type of junk? and Im expecting too much?
#3
![Default](https://dodgeforum.com/forum/images/icons/icon1.gif)
I know the cruise works in conjunction with the Speed Sensor unit on the trans, if you got one going it would cause this sort of problem, I've never known a cruz unit to fail, it's usually something it works with, my my speed sensor went out it rook my speedometer (obviously), OD switch (couldn't turn it off), and my cruz
#4
![Default](https://dodgeforum.com/forum/images/icons/icon1.gif)
My cruise does the same thing (not quite as bad though.) Sometimes my OD will just turn off by itself. Its like I hit the button but I didn't. After it does that I just hit the button and the OD turns back on. Also sometimes when I am using the cruise the check engine light will come on but it never comes on if I dont use the cruise. Is it this speed sensor?