1st Gen Dakota Tech 1987 - 1996 Dodge Dakota Tech - The ultimate forum for technical help on the 1st Gen Dakota.

Fuel pressure in 97 318 Dakota?

Thread Tools
 
Search this Thread
 
Old May 24, 2009 | 10:39 PM
  #1  
dbilik's Avatar
dbilik
Thread Starter
|
Record Breaker
Joined: Feb 2008
Posts: 1,058
Likes: 7
From: Chicago, IL
Default Fuel pressure in 97 318 Dakota?

Title says it all almost. I am looking for the fuel pressure in a stock system on a 97 Dakota with a 318 in it. I have looked up my trucks info and I am running 35-45 PSI on both the V6 and V8 in 1995. My V6 has a return fuel line I believe. The V8 I got does not. I heard that it may require a 100 PSI fuel pump in the 1997 Dakota, but I need to verify.
 
Reply
Old May 24, 2009 | 10:50 PM
  #2  
dodgerules86's Avatar
dodgerules86
Champion
Joined: Dec 2003
Posts: 4,119
Likes: 5
From: Sycamore, Illinois (displaced to Arkansas)
Default

Nope. 49.2 +/- 5PSI.
 
Reply
Old May 24, 2009 | 11:32 PM
  #3  
dbilik's Avatar
dbilik
Thread Starter
|
Record Breaker
Joined: Feb 2008
Posts: 1,058
Likes: 7
From: Chicago, IL
Default

Thanks. I thought I was missing something somewhere. Getting worried over nothing.
 
Reply
Old Jul 5, 2009 | 09:08 AM
  #4  
mpburris's Avatar
mpburris
Registered User
Joined: Jun 2009
Posts: 10
Likes: 0
Default

I have also been experiencing these same problems on my 95 Dodge Dakota 5.2 ltr 318. The fuel pump is working; however... not been able to determine if this is actual issue with the fuel pump itself, or an electronic/pcm issue, wiring, etc... Not sure if I should just spend the ridiculous $155 to replace the fuel pump or not!? Have already had the fuel pump out, fixed a couple vacuum lines, tested pump for actual working, and truck is still cranking most of the time, runs smooth sitting..., go down the street, put some gas to it, and jumps, missing...sometimes backfiring.., and sometimes, it doesn't even want to crank. Wasn't sure if a fuel pump could give you "inconsistent" operation for a few weeks?, or if it would just one day "not work"? Also, not sure, IF I go get this pressure gage, ck the pressure, it maybe NOT be correct psi.., and IF that would be the pump itself?, or again... some electronic issue? Thanks
 
Reply
Old Feb 7, 2010 | 04:29 PM
  #5  
micahthorlawson's Avatar
micahthorlawson
Registered User
Joined: Jan 2010
Posts: 7
Likes: 0
Default

did you ever figuere is out? I am running into the same thing on my 93 318
 
Reply




All times are GMT -4. The time now is 02:02 AM.