1st Gen Dakota Tech 1987 - 1996 Dodge Dakota Tech - The ultimate forum for technical help on the 1st Gen Dakota.

93 not running right, need help.

Old May 6, 2010 | 07:57 AM
  #1  
JnJ's Avatar
JnJ
Thread Starter
|
Registered User
Joined: Oct 2009
Posts: 19
Likes: 0
Default 93 not running right, need help UpDate, Code 51.

Hey guys, my truck started running poorly a couple days ago and it is getting worst.
The check engine light has not come on.
It will start and idle well.
It will accelerate well.
When maintaining speed (slight throttle) it hesitates and seems to lurch.
When coming off the gas to coast to a stop, it idles way down and today it died a couple times. It always starts right back up and idles fine in park or neutral.
I believe the odor I detect when it is running is rich.
My thoughts; since it smells rich I think it may be a spark issue. I plan to replace the plugs, plug wires, distributer cap, and rotor.
Since it hesitates under partial throttle, it may be a fuel delivery issue, but I don't know.
What do you guys think?
I plan to try and check for codes sometime today.

Thanks
 

Last edited by JnJ; May 7, 2010 at 09:33 AM.
Reply
Old May 6, 2010 | 10:11 AM
  #2  
doctormod's Avatar
doctormod
Registered User
Joined: Apr 2010
Posts: 27
Likes: 0
Default

mine is having slightly similar issues, i have gone through all the normal stuff (cap rotor plugs wires oil change pcv iac thermostat etc) at this point i suspect the egr valve, ima try and clean it up first and then replace, if your not short on cash, i would throw that in the loop of things to change right off the bat...just an opinion, i am no pro lol
 
Reply
Old May 6, 2010 | 10:36 AM
  #3  
Crazy4x4RT's Avatar
Crazy4x4RT
Hall Of Fame
Joined: Aug 2007
Posts: 10,923
Likes: 19
From: NM
Default

Tons of possibilities. First I would suggest to take a look at every wire, hose, connection. It can be a vacuum leak to a bad coil cap rotor. A tune up would be a good start.
 
Reply
Old May 6, 2010 | 06:29 PM
  #4  
JnJ's Avatar
JnJ
Thread Starter
|
Registered User
Joined: Oct 2009
Posts: 19
Likes: 0
Default

Ok, I ran the codes and got #51 fuel system lean. So, any idea what may be causing this? I thought it smelt rich, which would be lean, right?
 
Reply
Old May 7, 2010 | 11:40 AM
  #5  
JnJ's Avatar
JnJ
Thread Starter
|
Registered User
Joined: Oct 2009
Posts: 19
Likes: 0
Default

Problem solved, it was a bad O2 sensor.
 
Reply


Thread Tools
Search this Thread

All times are GMT -4. The time now is 03:42 PM.