1st Gen Dakota Tech 1987 - 1996 Dodge Dakota Tech - The ultimate forum for technical help on the 1st Gen Dakota.

No lights

Old Sep 29, 2010 | 07:54 PM
  #1  
reeferbro0622's Avatar
reeferbro0622
Thread Starter
|
Registered User
Joined: Jul 2010
Posts: 46
Likes: 0
From: pa bucks county
Angry No lights

Installed some new speakers some crappy kickers and eclipses, but ther are better than stock speakers from 95. I installed them correctly. Turned off the car... replaced the 4 speakers (2 front 2 back). Turned it up to check out the clarity and the lights inside the cab and on the radio shut off. Now will just open the doors and the lights wont come on and when I start it the lights in the cab (headlights are working fine, so is dash, so is AC area) and the radio wont get power.

Blown fuse??? Was it beacause I cranked up the volume too loud ? I bought kickers, elcipses, and i have a jvc kd hdr1 radio.
 
Reply
Old Sep 29, 2010 | 09:04 PM
  #2  
reeferbro0622's Avatar
reeferbro0622
Thread Starter
|
Registered User
Joined: Jul 2010
Posts: 46
Likes: 0
From: pa bucks county
Default

so what im asking is is the audio fuse(12) and the cab lights (i dont know possibly 12) the same? what do i need to do to get everything working? tia
 
Reply
Old Sep 29, 2010 | 10:55 PM
  #3  
festerw's Avatar
festerw
Veteran
Joined: Jul 2009
Posts: 447
Likes: 0
Default

In the PDC under the hood is the 5 AMP IOD fuse that controls radio + interior lights.
 
Reply
Old Sep 30, 2010 | 05:54 AM
  #4  
reeferbro0622's Avatar
reeferbro0622
Thread Starter
|
Registered User
Joined: Jul 2010
Posts: 46
Likes: 0
From: pa bucks county
Default

Originally Posted by festerw
In the PDC under the hood is the 5 AMP IOD fuse that controls radio + interior lights.
ok thanks i'll replace that one because the 10 amp red that controls the radio in the fuse box, not pdc, didnt look fried.
 
Reply


Thread Tools
Search this Thread

All times are GMT -4. The time now is 07:56 AM.